Ive got an 86 ranger with the fuel injected 2.3L 4 banger, fuel pump wont come on and the injectors wont fir so i need an EEC.
Preferably in Canada, can pay with paypal.
Thanks, Gordon
I havent dug that far in yet but i will check for power at the injectors today.
I'm hoping its something simple and not the eec, they are hard to find.
I can jump the fuel relay and make the pumps run but it will not run.
I want to check at the eec to see if theres a signal for the injectors, so many broken wires found already figured i would go to the source.
I searched and found an eec output for the 2.9... is it the same for the 2.3?
If not does anyone have a pinout for this old beast?
I opened the eec and replaced the capacitors (1 was leaking out the bottom) but i still have no fuel pump or injectors. Will start on ether and then die.
Thx
I can get the pumps to run and make fuel pressure, really good spark on all 4 but the damn injectors wont activate.
I'm really not sure how to even test the ecu to see if its outputting anything to them. For all i know, theres 10 more broken wires somewhere hahaha.
i did find a used ecu on...
Thus far ive had no luck finding a distributor or suitable carb.
Not sure i want to buy another ecu for $200, im thinking this truck has many more issues waiting for me yet.
I got to looking at this intake, looks like it would be pretty easy to adapt a 2bbl carb to it.
Being as it already has spark and will run on ether.. would it need anything other then a low pressure fuel pump?
Thx
Okay so the IAC is located on the air box i found out, tested at that plug and get 12 volts (ish) with the key on.
Found a broken green wire going into the coil (no idea how it had spark with that broken wire) and fixed that.
Checked the ignition on the column and the switch is falling apart...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.