I only had a few minutes to do some quick diags this morning before the rain picked up (truck is outside). I found ZERO voltage on the dual B+ circuits, as measured at the alternator connector. I then checked the mega circuit box and found that one of the 60A fuses had blown. I'll swap in a...
Printed this out and wrote down some testing notes. I presume if the fuse had failed on the Grn/Red circuit that goes back through the instrument cluster, the battery light wouldn't even come on, yes? I'll check that fuse regardless, but just wanted to know if the fuse was really in play as...
Just re-reading this and I realize you probably are thinking this is a 3G alternator. It's not - it's a 2G. If it was my truck (it's my neighbor's), I would upgrade to a 3G, but trying to keep this as close to stock as possible.
Thanks for the excellent and detailed diagnostic path. I need to take my own advise and do actual diags first rather than being a brainless parts swapper.
'89 w/ 2.3 engine and without obvious cause, the battery charging light is illuminated. Verified no-charge condition at battery. Knowing it's most often the voltage regulator that fails, I first tried swapping that. No change. I tried re-freshing the contacts on both connectors and dabbed a...
Thanks for the details. It's a like-for-like swap in a base 5-speed truck. The existing column got busted up when someone apparently tried to steal the truck. It's my neighbor's truck that I work on, so exact details are short.
I'm planning to head to the junkyard this weekend to remove a steering column. Any unusual tools I should bring along? It's all metric, yes?
I'm hoping to find a donor from a 5-speed truck, but how usable would a column be from an automatic? Can the shifter portion just be removed or is it...
Thanks for confirming what I suspected was the case. Pre-'95 Rangers have gotten somewhat scarce in the junkyards due to their age, so it's good to have options.
Thanks for all the input. I'm not sure why these sort of discussions become somewhat heated, but it doesn't really phase me, so no biggie.
Given that this is not my truck (it's my neighbor's), I actually am now leaning more towards getting a junkyard column and keeping it stock. I see that...
I get your point and I won't rule it out. I would also need to get a new lock tumbler and key, unless I got lucky enough to get a steering column that came with a key. Anyone know offhand if the similar era F-150 uses the same tumbler? I may have a spare set that I pulled from a ~1990 F-150.
Thanks for the details. In my case, the old cylinder is gone and the area of the casting that holds it is broken apart somewhat. Regardless, I'm pretty sure I could manually fix things to the Run position as you did. Did you have any concerns about it moving out of that position on it's own...
Bumping this old thread as I'm looking to do a push-button ignition conversion to my neighbor's '89 2.3. Why, you ask? We think someone tried to steal the truck and completely busted out the ignition tumbler and casting. As such, I'd need to replace the whole assembly if I wanted to repair it...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.