Having trouble fitt'n 35's

[JBSRANGERDANGER]

I just bought a 94 ranger and put on a 4 inch suspension lift but i only have 33's on it id love to put 35's but im told they'll rub is there nething i can do like take fender flares or the front bumper off to fit these tires..... Any input would be greatly appreciated

 

[LittleBigFoot]

A body lift could help. And what size wheels are you using?

 

[97_4x4]

You will most likely need the 6" springs AND a 3" BL to fit 35's.

Chris

 

[Roger]

I'm putting 35s on a 90 with 6" lift... But then, I also have fiberglass front fenders and will need to stretch the back fenders too. Or I might even have to cut the wheel well open a bit, have to see when I get them fit.

 

[ChrisR1S]

If im not mistakin you're gonna need a 3" bodylift and a leveled front end-coils that are 2" higher than your lift, which means you'd need the 6" coils... or not reccomended but coil spacers if your outta money and desperate for them. And even then you MAY still need to trim a fender or two, especially if you have 10" rims.

 

[93_ranger]

I have a 93 ranger 2wd and i fit 35's with no problem. I got 8 inches suspension lift, 3 inches body lift, a front tube bumper, and I had to trim my fenders a bit.

 

[fordman49450]

If I were you, if you dont want to go any higher with it such as a body lift, just get a set of fender flares and trim the fenders