PCV valve elbow

roncampbell · Apr 13, 2009

When I tried to replace my pvc valve on a 99 3.0 the one from the auto parts store is straight my valve has a 90 degree elbow on top I can't use a straight without replacing and rerouting the tubing. What's up?

RumpRanger98 · Apr 13, 2009

the pcv valve you got probably is a universal part that fits in.

try a motorcraft pcv valve from ford, it should be what you need...I would think

warrior24 · Apr 13, 2009

how about using a spark plug boot elbow. attached to the pcv valve.

Toms01PSD · Apr 13, 2009

Did you get one from autozone? Did you try using the old elbow on the new valve?

RangerRocker · Apr 13, 2009

You are going to need to get one from Ford. That is the only place I could find one for my truck. But the told me I had to buy an entire rail, not just the elbow.

Blackedge03 · Apr 14, 2009

O'reilly auto parts sells one that has both the straight and elbow fitting in the package so you can use the one you need. At least that the way it was for my 03 ranger.

Bryan22 · Apr 14, 2009

that's kinda funny cause i got one for my 2.3 that had an elbow and i had to break it off b/c the 2.3 uses a straight one. i bet if you take it back they can find one with an elbow.

Toms01PSD · Apr 14, 2009

The one I bought didn't have an elbow and I ended up breaking my old one because it was a bear to get back in. I went back to autozone and they gave me an elbow out of another package. Take the old elbow to the store with you.

Beef52751 · Apr 14, 2009

i used the elbow off of the old Valve when i did mine.
Beef

RangerRocker · Apr 15, 2009

Does anybody have part numbers for this stuff? I really want to replace mine.

Toms01PSD · Apr 15, 2009

go to autozone...or whoever you like. They will have it there.

BIDNESS57 · Apr 16, 2009

After using differnt size hoses to fit the intake side and step down to the pcv valve, I managed to make it work , only to see the hose collapse while the engine was, I decided that I would just go to Ford and purchase. It can be done, but at what expense in trial and error and $ ( 3.0 flex fuel)

Toms01PSD · Apr 16, 2009

Use the hose that was on the truck. It is a royal PITA but it WILL work. It is a very tight fit.

roncampbell · Apr 18, 2009

Got it

My valve was an original motorcraft one piece elbow I went to an oldline auto parts store called Ridge & Kramer they have fourteen stores throughout southwest Michigan that's no help to the guys in NC and AZ.
The part is Standard V333.
go to this URL and type in V333 in the box for a picture.
http://www.standardbrand.com/web_app/catalog/smp_bgbulk.aspx

PCV valve elbow

New Member

New Member

New Member

New Member

New Member

New Member

New Member

New Member

Active Member

New Member

New Member

New Member

New Member

New Member

Sponsored Ad

Sponsored Ad

Today's birthdays

Member & Vendor Upgrades

Truck of The Month

Recently Featured

Follow TRS On Instagram

TRS Events

25th Anniversary Sponsors

Check Out The TRS Store

Sponsored Ad

Sponsored Ad

Sponsored Ad

Amazon Deals