Can I buy rear fenders aka bedsides?

bigredscowboy · 01-27-2009, 05:49 PM

Does anyone know if I can buy aftermarket (or OEM) rear fenders or bedsides? I've looked all over the interweb and can't find any. My passenger side has seen better days:

triumphrider-1 · 01-27-2009, 05:55 PM

LMC has them, maybe a couple other places, but you could probably get a whole bed for the price they charge for one side.

Nipplechops · 01-27-2009, 06:03 PM

Most autobody supply stores sell them. The one up the street from me here in Calgary sells them for Gen 1/2's for 220 a side. Not sure about the newer ones.

That damage could easily be fixed with a stud gun and slide hammer along with some body filler. I've seen panels in much worse shape than that pulled back to almost new. Hell, I suck at bodywork and I've hammered worse looking panels back into shape.

A paintless dent repair place may be able to help as well. I saw a thread on Pirate a couple of years ago or so where some dude there pulled a completely FUBAR panel back straight so it was almost like new. The guy wais an artist to say the least.

Shran · 01-27-2009, 06:04 PM

LMC only has them for 1st and 2nd gen, and all years that stepsides were offered. You pay far out the ass for them from there anyway...one side for mine is $400.

bigredscowboy · 01-30-2009, 02:47 PM

I've only found stepsides

shadetree · 01-30-2009, 02:56 PM

It would be easier to fix the dent than to change the panel.

shady

slammed93 · 01-30-2009, 04:35 PM

Give Camburg.com a look at.

http://camburg.com/fiberglass.html

rangerdanger9398 · 01-30-2009, 04:55 PM

i did the same thing to my truck smashed in the light. pm me on how you make out iv been looking for a new box, i found a real nice one for 700 but if they make a panel piece id rather do that.

**ZMan** · 01-30-2009, 05:17 PM

Quote:

Originally Posted by Nipplechops

Most autobody supply stores sell them. The one up the street from me here in Calgary sells them for Gen 1/2's for 220 a side. Not sure about the newer ones.

That damage could easily be fixed with a stud gun and slide hammer along with some body filler. I've seen panels in much worse shape than that pulled back to almost new. Hell, I suck at bodywork and I've hammered worse looking panels back into shape.

A paintless dent repair place may be able to help as well. I saw a thread on Pirate a couple of years ago or so where some dude there pulled a completely FUBAR panel back straight so it was almost like new. The guy wais an artist to say the least.

That particular spot would actually be really hard to fix. Theres a lot of tension i the metal on those curves, not to mention all of the body lines that run through there.

01-27-2009, 05:49 PM	#1
bigredscowboy Member Join Date: Nov 2008 Location: Western NC Year: 2003 Make: Ford Model: Ranger Edge Engine: 4.0 Class: 4x4 Used For: Holding down cinder blocks Posts: 160 Rep Power: 10 iTrader: (2)	Can I buy rear fenders aka bedsides? Does anyone know if I can buy aftermarket (or OEM) rear fenders or bedsides? I've looked all over the interweb and can't find any. My passenger side has seen better days:
	Tweet

01-27-2009, 05:55 PM	#2
triumphrider-1 Member Join Date: Nov 2007 Location: Port Huron, MI Year: 1999 Make: Ford Model: Ranger XLT Engine: 3.0L Class: 4x4 Used For: Pondering Posts: 2,001 Rep Power: 19 iTrader: (0)	LMC has them, maybe a couple other places, but you could probably get a whole bed for the price they charge for one side. __________________ 1999 Ranger XLT 4x4 Supercab four door 3.0L flex fuel, automatic transmission "Minds are like parachutes, they only function when open" - Anna Pavlova
	Tweet

01-27-2009, 06:03 PM	#3
Nipplechops Member Join Date: Nov 2008 Location: Airdrie, Alberta Year: 1988 Make: Ford Model: Ranger Supercab Engine: 2.3L Turbo Class: 2WD Used For: Nothing yet. Still a work in progress. Posts: 302 Rep Power: 10 iTrader: (0)	Most autobody supply stores sell them. The one up the street from me here in Calgary sells them for Gen 1/2's for 220 a side. Not sure about the newer ones. That damage could easily be fixed with a stud gun and slide hammer along with some body filler. I've seen panels in much worse shape than that pulled back to almost new. Hell, I suck at bodywork and I've hammered worse looking panels back into shape. A paintless dent repair place may be able to help as well. I saw a thread on Pirate a couple of years ago or so where some dude there pulled a completely FUBAR panel back straight so it was almost like new. The guy wais an artist to say the least. __________________
	Tweet

01-27-2009, 06:04 PM	#4
Shran Member Join Date: Mar 2008 Location: Rapid City SD Posts: 3,141 Rep Power: 17 iTrader: (3)	LMC only has them for 1st and 2nd gen, and all years that stepsides were offered. You pay far out the ass for them from there anyway...one side for mine is $400. __________________ 1986 Ranger XL 4x4, 302, NP435/205, HP D44, RCV shafts, 8.8 Lock-rite/lsd, 4.10 gears, 35" BFG M/T --- Build Thread 1996 Ranger XLT 4x2, 2.3, M5OD 1986 F150 4x2 302/T18 1985 F250 4x4 460/T19
	Tweet

01-30-2009, 02:47 PM	#5
bigredscowboy Member Join Date: Nov 2008 Location: Western NC Year: 2003 Make: Ford Model: Ranger Edge Engine: 4.0 Class: 4x4 Used For: Holding down cinder blocks Posts: 160 Rep Power: 10 iTrader: (2)	I've only found stepsides
	Tweet

01-30-2009, 02:56 PM	#6
shadetree Member Join Date: Sep 2007 Location: East Texas Year: 1994 Make: Explorer Sport Engine: 4.0 Class: 2WD Used For: Work Posts: 1,799 Rep Power: 15 iTrader: (0)	It would be easier to fix the dent than to change the panel.shady
	Tweet

01-30-2009, 04:35 PM	#7
slammed93 Junior Member Join Date: Dec 2008 Location: Ontario, Canada Year: 1993 Make: Ford Model: Ranger Engine: 4.0L Class: 4x4 Used For: Daily Driver Posts: 38 Rep Power: 10 iTrader: (0)	Give Camburg.com a look at. http://camburg.com/fiberglass.html __________________ »»--> TRAViS <--«« Visiting FromRanger-Forums.com
	Tweet

01-30-2009, 04:55 PM	#8
rangerdanger9398 Junior Member Join Date: Dec 2008 Location: alden ny Year: 1996 Make: ford Model: ranger xlt 4.0 Engine: 4.0 Class: 4x4 Used For: every day driver Posts: 60 Rep Power: 9 iTrader: (0)	i did the same thing to my truck smashed in the light. pm me on how you make out iv been looking for a new box, i found a real nice one for 700 but if they make a panel piece id rather do that. __________________ THE RANGER MONSTOR
	Tweet

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode