seat swap

kaytor692 · 02-06-2012, 09:45 PM

i found a set of seats from a 93+ ranger wanted not no if they will fit in my 86 b2?

**Ruffinit** · 02-07-2012, 11:13 AM

Yes, they will fit. When you take the seats out of the BII, take the seat off the seat frame. They just unbolt. Do the same with the Ranger seats and bolt them back on. What you'll have is the new seats bolted onto the BII seat frames and all will work well.

That is.. I'm assuming that you are going from bucket to bucket or bench to bench.

kaytor692 · 02-07-2012, 05:41 PM

sweet ya im going bucket to bucket but the driver seat from the ranger has a console attached there 60/40 split combo

**adsm08** · 02-07-2012, 05:58 PM

60/40 splits are considered buckets.

sjr53 · 02-07-2012, 06:39 PM

I put 93 Explorer seats onto my 86 BII seat frames. The passenger side seat hinge had a smaller hole that needed drilling out, but everything else was bolt-on. I put the BII seats onto the Explorer frames and installed them into my 61 Falcon. The high back seats looked bad in the Falcon.

kaytor692 · 02-07-2012, 06:46 PM

anyone no if mustang seats will fit (out of a fox body)?

forzda · 02-07-2012, 07:44 PM

Quote:

Originally Posted by kaytor692

anyone no if mustang seats will fit (out of a fox body)?

yes they will , but you need to change the seat rails

kaytor692 · 03-07-2012, 04:14 PM

will 97 exploder seats fit on my 86 B2 rails? they are power adjustable if that makes a difference

MrE_Powers · 03-07-2012, 06:44 PM

only the seat rails from a 91 sport will fit b 2 if i recall correctly.

kaytor692 · 03-07-2012, 08:36 PM

will the seats themselves fit in the B2 rails and sliders?

MrE_Powers · 03-08-2012, 04:27 PM

yes... i have 94 ranger seats in my 84 with the 84 rails.

inuyasha2875 · 03-08-2012, 11:16 PM

two door explorer seats are nice and i used the expo seat rails in my 86 bii so now both front seat flip forward and slide all the way up to the dash

02-06-2012, 09:45 PM	#1
kaytor692 Junior Member Join Date: Nov 2011 Year: 1986 Make: ford bronco ll Model: base Posts: 37 Rep Power: 3 iTrader: (0)	seat swap i found a set of seats from a 93+ ranger wanted not no if they will fit in my 86 b2?
	Tweet

02-07-2012, 11:13 AM	#2
Ruffinit Premium Member Join Date: Oct 2007 Location: Muscatine, Iowa Year: 1996, 2003 Make: Ford Model: Ranger Splash, XLT Engine: 4.0, 2.3 Duratec Class: 4x4, 2WD Posts: 203 Rep Power: 12 iTrader: (0)	Yes, they will fit. When you take the seats out of the BII, take the seat off the seat frame. They just unbolt. Do the same with the Ranger seats and bolt them back on. What you'll have is the new seats bolted onto the BII seat frames and all will work well. That is.. I'm assuming that you are going from bucket to bucket or bench to bench.
	Tweet

02-07-2012, 05:41 PM	#3
kaytor692 Junior Member Join Date: Nov 2011 Year: 1986 Make: ford bronco ll Model: base Posts: 37 Rep Power: 3 iTrader: (0)	sweet ya im going bucket to bucket but the driver seat from the ranger has a console attached there 60/40 split combo
	Tweet

02-07-2012, 06:39 PM	#5
sjr53 Junior Member Join Date: Dec 2008 Location: Grand Forks North Dakota Year: 1986 Make: Ford Model: Bronco II Engine: 2.9L Class: 4x4 Posts: 85 Rep Power: 9 iTrader: (0)	I put 93 Explorer seats onto my 86 BII seat frames. The passenger side seat hinge had a smaller hole that needed drilling out, but everything else was bolt-on. I put the BII seats onto the Explorer frames and installed them into my 61 Falcon. The high back seats looked bad in the Falcon.
	Tweet

02-07-2012, 06:46 PM	#6
kaytor692 Junior Member Join Date: Nov 2011 Year: 1986 Make: ford bronco ll Model: base Posts: 37 Rep Power: 3 iTrader: (0)	anyone no if mustang seats will fit (out of a fox body)?
	Tweet

03-07-2012, 04:14 PM	#8
kaytor692 Junior Member Join Date: Nov 2011 Year: 1986 Make: ford bronco ll Model: base Posts: 37 Rep Power: 3 iTrader: (0)	will 97 exploder seats fit on my 86 B2 rails? they are power adjustable if that makes a difference
	Tweet

03-07-2012, 08:36 PM	#10
kaytor692 Junior Member Join Date: Nov 2011 Year: 1986 Make: ford bronco ll Model: base Posts: 37 Rep Power: 3 iTrader: (0)	will the seats themselves fit in the B2 rails and sliders?
	Tweet

03-08-2012, 11:16 PM	#12
inuyasha2875 Member Join Date: Oct 2008 Location: Post Falls Idaho Year: 1983,1986 Make: FORD Model: RANGER 4X4 BRONCO II RANGER EX CAB 2WD Engine: 2.8,2.9 Class: 4x4 Used For: everything Posts: 249 Rep Power: 10 iTrader: (1)	two door explorer seats are nice and i used the expo seat rails in my 86 bii so now both front seat flip forward and slide all the way up to the dash __________________ are we lost yet
	Tweet

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode