|
| Home | Resources | Tech Library | Magazine | Video Gallery | Truck Gallery | Shirts & Decals | Parts |
|
|
|
|
#16 |
|
Member
Join Date: Apr 2009
Location: Tempe, AZ
Year: 2010
Make: Ford
Model: Ranger
Posts: 1,592
Rep Power: 6 ![]() iTrader: (0)
|
Great pick up Koda! I love the Exterior, very sporty! However the interior is FUGLY(roundness everywhere!!) but its a commuter and will serve its purpose well. Looks like previous owner took very good care of her. Whats the odometer read?
|
|
|
|
|
|
#17 |
|
Premium Member
![]() Join Date: Aug 2007
Location: Toledo, Ohio
Year: 1987
Make: Ford
Model: Ranger
Posts: 2,589
Rep Power: 11 ![]() iTrader: (16)
|
they are good cars koda, i think you'll be happy. let me know if you've got any questions, i know lots about escorts/zx2's
__________________
1987 Ranger Supercab STX, 4.0/M5OD/BW1350 4.10LS, 2" Lift, 31's 1987 Ranger Supercab STX, SOLD -> Replaced with 1991 Escort GT (Daily Driver) 1987 Ranger Longbed, Parted Out! |
|
|
|
|
|
#18 | |
|
Um, yes
![]() Join Date: Feb 2009
Location: Sanford, NC
Year: 98
Make: Ford
Model: Ranger
Engine: 4.go
Class: 4x4
Used For: Everyday use, off-road
Posts: 2,867
Rep Power: 8 ![]() iTrader: (4)
|
The 5 speed ZX2's are quick. I've never been for a ride in the auto version though.
__________________
http://www.obamaclock.org/ Quote:
|
|
|
|
|
|
|
#19 |
|
New Member
|
Congrats on the ZX-2, my brother has one. My wife and I had a Focus with the same ZETEC motor.
Good car and good motor only bad thing is the electrical. The battery cable/connector rust quite prematurely (underneath as well) do check if you get a no start. Congrats
__________________
3.0 auto 3.73 pure stock. Tonneau Cover |
|
|
|
|
|
#20 |
|
New Member
Join Date: Nov 2009
Location: Las Vegas, NV
Year: 1996
Make: Mazda
Model: b2300 ex cab
Engine: 2.3
Class: 2WD
Posts: 2
Rep Power: 0 ![]() iTrader: (0)
|
Is that the zetec? or the SPI? If you have the SPI I pity you. I blew the valve seats out like 3 times in a year, before I dropped the car at the junk yard and told em to do whatever they want with it.
|
|
|
|
|
|
#21 | |||
|
Member
Join Date: Nov 2007
Location: Masonville NY
Year: 1993
Make: Ford
Model: Ranger XL
Engine: 3.0
Class: 2wd
Used For: Daily Driver.
Posts: 5,634
Rep Power: 17 ![]() iTrader: (1)
|
Quote:
Quote:
Quote:
Anyway, right now I'm working on that spoiler. Keeping paint smooth is hard to do. I also touched up a few spots where the paint chipped off on the hood and a four foot key mark where somebody didn't like the previous owner too much.
__________________
1993 Ford Ranger XL Supercab 3.0 V6 AKA "Stitch" Build Thread : Project Life Support Build Thread : Koda's Zx2 Build Thread : Project XJ |
|||
|
|
|
|
|
#22 |
|
February 2010 OTOTM Winner
Join Date: Sep 2008
Location: Boring, Oregon
Year: 2001
Make: Ford
Model: Ranger
Class: Snow Wheeler/DD
Used For: Pickin' up chicks.
Posts: 1,742
Rep Power: 7 ![]() iTrader: (0)
|
They're good little cars. I've always secretly wanted one, then absolutely wanted one when they introduced the Zx2 S/R package. Dad almost bought one....if he did, I would'nt be driving a Ranger.
Parents eventually bought one....1998. Gay light metallic blue with super light grey interior. Hate the combo. Nothing goes well on that exterior color. Wish it was a 2000 like yours with dark interior and a normal exterior color. I'm looking at buying it of them. |
|
|
|
|
|
#23 |
|
Member
Join Date: Nov 2007
Location: Masonville NY
Year: 1993
Make: Ford
Model: Ranger XL
Engine: 3.0
Class: 2wd
Used For: Daily Driver.
Posts: 5,634
Rep Power: 17 ![]() iTrader: (1)
|
Here's that spoiler. Doesn't look too bad for spay can job if you ask me, still needs some clear though.
![]() Oh, and I came home today from spending the past couple of days with my ex girlfriend to find that I received a package. ![]() ![]() Now I just have to pick up a few things to put it on, although I'm going to see if I can salvage my current exhaust tip. I'm short on cash right now, and I need to cut corners where I can. I might run it without a tip for a while. And about it being a glasspack on an escort, if I don't like the sound, I'll put it on my truck and swap mufflers. The truck has a semi-new one as well. I need to paint it too.. bumping around in the box made it lose some. I don't want this to rust out right away.
__________________
1993 Ford Ranger XL Supercab 3.0 V6 AKA "Stitch" Build Thread : Project Life Support Build Thread : Koda's Zx2 Build Thread : Project XJ Last edited by koda6966; 11-12-2009 at 10:19 AM. Reason: added a picture. |
|
|
|
|
|
#24 |
|
Member
Join Date: Nov 2007
Location: Masonville NY
Year: 1993
Make: Ford
Model: Ranger XL
Engine: 3.0
Class: 2wd
Used For: Daily Driver.
Posts: 5,634
Rep Power: 17 ![]() iTrader: (1)
|
Finished painting the exhaust today. That paint takes a long time to dry in this kind of weather. Sadly the tip I bought doesn't fit too well so I'll be returning that one and looking for another. I might go with round, since an oval doesn't look too good with this muffler.
I'm looking at putting it all on tomorrow morning before work. Since someone stole my 12 gauge sabots I won't be doing any hunting on the first day.
__________________
1993 Ford Ranger XL Supercab 3.0 V6 AKA "Stitch" Build Thread : Project Life Support Build Thread : Koda's Zx2 Build Thread : Project XJ |
|
|
|
|
|
#25 |
|
Member
Join Date: Nov 2007
Location: Masonville NY
Year: 1993
Make: Ford
Model: Ranger XL
Engine: 3.0
Class: 2wd
Used For: Daily Driver.
Posts: 5,634
Rep Power: 17 ![]() iTrader: (1)
|
Picture of the Exhaust.
![]() And the 3R racing tip I bought from Advance after I returned the other one.
__________________
1993 Ford Ranger XL Supercab 3.0 V6 AKA "Stitch" Build Thread : Project Life Support Build Thread : Koda's Zx2 Build Thread : Project XJ |
|
|
|
|
|
#26 |
|
Member
Join Date: Nov 2007
Location: Masonville NY
Year: 1993
Make: Ford
Model: Ranger XL
Engine: 3.0
Class: 2wd
Used For: Daily Driver.
Posts: 5,634
Rep Power: 17 ![]() iTrader: (1)
|
Here's the old muffler off the car. If you look closely at the 3rd picture you can see the Ford Emblem. I bet that looked nice off the line, damn rust belt.
![]() ![]() ![]() Got the extension bolted in. You have no idea how hard it was to hacksaw that off muffler right there. I sliced my hand on the extension too, because I forgot to take the burrs off with my linesmans before I installed it. Plus I broke two of my best EMT cutting blades on that sucker. I had to use the "mini" hacksaw for two of the hangars and the end of the muffler, and if you don't hold it strait it bends blades. ![]() New muffler before I put in a horizontal support. ![]() After adding the support. Basically where I want it to be. I had to move it over some to keep it from rubbing the brake line. ![]() Here's that support. It's done up with #14 AWG Aluminum wire. I have about 250 feet of it, so I use it for almost everything. Since a single strand held my spare tire under my truck for a few years I trust it to hold my exhaust. ![]() Don't ask what the lines on some of the pictures are, I don't know. Something happened when I uploaded them to my computer VIA usb cord since my card reader is missing. If I don't feel too lazy I'll redo it. And of course, you can't forget the video. Before you say it yes I know I'm running rich, I have a bad o2 sensor. The previous owner unhooked the battery to clear the codes so I didn't find out until a few weeks after I bought it.
__________________
1993 Ford Ranger XL Supercab 3.0 V6 AKA "Stitch" Build Thread : Project Life Support Build Thread : Koda's Zx2 Build Thread : Project XJ |
|
|
|
|
|
#27 |
|
Member
Join Date: Nov 2007
Location: Masonville NY
Year: 1993
Make: Ford
Model: Ranger XL
Engine: 3.0
Class: 2wd
Used For: Daily Driver.
Posts: 5,634
Rep Power: 17 ![]() iTrader: (1)
|
Added in the vertical support today, basically it went from a stock hangar on the right to one on the left to keep the exhaust from bouncing around so much and hitting on the "axle" area. Now it is about 2" higher than it was and doesn't make an annoying banging sound while it's running. A guy over on a Zx2 forum I just became a member of is complaining about my use of 14AWG wire, but I trust this wire more than I do the little metal things they sell at advance auto. Aluminum doesn't rust, and is VERY strong when stranded. I'm running six or seven strands on the horizontal support and about ten or twelve on the vertical support, that's close to 3 or 4 wire I think. Which is big. Considering one strand has held my spare tire under my Ranger for a while, I'm very confident that this will hold my exhaust from bouncing around. Plus I think I used this on my Rangers as well, to hold it up.
__________________
1993 Ford Ranger XL Supercab 3.0 V6 AKA "Stitch" Build Thread : Project Life Support Build Thread : Koda's Zx2 Build Thread : Project XJ |
|
|
|
|
|
#28 |
|
Member
Join Date: Nov 2007
Location: Masonville NY
Year: 1993
Make: Ford
Model: Ranger XL
Engine: 3.0
Class: 2wd
Used For: Daily Driver.
Posts: 5,634
Rep Power: 17 ![]() iTrader: (1)
|
Zx2 = Epic Win vs. snow.
__________________
1993 Ford Ranger XL Supercab 3.0 V6 AKA "Stitch" Build Thread : Project Life Support Build Thread : Koda's Zx2 Build Thread : Project XJ |
|
|
|
|
|
#29 |
|
Member
Join Date: Dec 2008
Location: Pennsylvania
Year: 1992
Make: Ford
Model: F-250 custom
Engine: 351
Class: 4x4
Used For: Everything.
Posts: 282
Rep Power: 4 ![]() iTrader: (0)
|
They are decent cars. But 2500$, for the one you have? I'd of offered him no more than 1800$. Your car seems have a fair amount of undercarriage rust.
|
|
|
|
|
|
#30 |
|
ɹǝʌo ǝɯ dılɟ
![]() Join Date: May 2009
Location: Metro Detroit
Year: 2004
Make: Ford
Model: Ranger FX4
Engine: 4.0L
Class: 4x4
Used For: Smuggling Contraband
Posts: 2,897
Rep Power: 8 ![]() iTrader: (0)
|
Ah, you discovered that!
Myself, and the 3 other ZX2 owners I have known, were always amazed at how unstoppable that car is in the snow.
__________________
2004 Ranger FX4 Alarm/Remote Start, Heads/Tails, Tonneau, Tint, T-Bar Twist, 06+ Mirrors, JVC HU, 4 Pioneer TS-D802P's, Basslink |
|
|
|
![]() |
| Bookmarks |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Kodas going to rebuild a transmission on his own? WHAT?!? | koda6966 | Transmissions | 42 | 03-19-2010 06:17 AM |
| zx2 as a dingy | stegomon | Towing | 9 | 12-25-2009 08:22 AM |
| Koda's custom case thread : Dell Insperon 530S. | koda6966 | Computer Corner | 15 | 07-23-2009 07:58 PM |