Inop drivers' power window


Most of these problems are the plastic gears, they disintegrate with age. You can get replacements at auto parts. Last I bought was $13 bucks. The motor/gear assembly will come off by itself, three small screws, 8mm I think. Two are exposed, and the other is behind the door. There is a small indentation in the door where the screw would be in relation to the other two. You drill a hole in the door to access the last screw. Once you look at it, you will see what I am talking about.:)shady
 
MAKG said:
Doing the job of three people.

It would be nice to get paid three times, but it doesn't work that way....
Click to expand...


what .... you working on the Titan project or something?
 
I've heard 1/4" nuts (like for 1/4" bolts) work to replace the bushings, but if it's $5 for the right parts I might just do it right when I do the explorer and lincoln...
 
I saw the plastic drive rollers in AutoZone the other day. I had scored them off of eBay before.
 
BDAB said:
what .... you working on the Titan project or something?
Click to expand...

Nope. SOFIA. Much smaller project than Titan (and it's 500 or 200 miles north, depending on how you count).

I get to be the algorithms guru, flight planning product lead, and simulators lead. #2 is my "real job."

From the Explorerforum post, it seems my idea was almost right, but I would have had some troubles with that "dimple" thing. I did spot the two other screws.
 
You must log in or register to reply here.

Sponsored Ad

TRS Events & Gatherings

Where We Were in 2025 – The Ranger Station

Latest posts

Featured Rangers

Want to see your truck here? Share your photos and details in the forum.

TRS Latest Video

Official TRS Merchandise

Follow TRS On Instagram

Latest Album Photos

IMG_4690.JPEG
IMG_4689.JPEG
IMG_4688.JPEG
IMG_4679.JPEG
IMG_4656.JPEG
IMG_4625.JPEG
IMG_4562.JPEG
IMG_4561.JPEG
IMG_4560.JPEG
IMG_4559.JPEG
IMG_4558.JPEG
IMG_4445.JPEG

Product Suggestions

Back
Top