I need more rear spring in my '05 2wd. I'm not looking for much lift, just less bounce from the 500 lbs of tools 'n parts I carry all the time.
Any charts around I can reference when looking for used springs?Also have a question, there are some numbers on the bottom leaf: 4L54 DA which is a part #, but what about the other number, RPN 1855? Is that a load number? My '00 4x4 has RPN 1710, and those springs have 1 less leaf. It would make selecting a spring a lot easier if ll we had to do was compare that RPN number.
Currently running air lift shocks at about 45 psi, and I don't like how they screw up the handling. Lots of bounce and roll. would rather have stiffer springs.
Thanks,
Perry
Any charts around I can reference when looking for used springs?Also have a question, there are some numbers on the bottom leaf: 4L54 DA which is a part #, but what about the other number, RPN 1855? Is that a load number? My '00 4x4 has RPN 1710, and those springs have 1 less leaf. It would make selecting a spring a lot easier if ll we had to do was compare that RPN number.
Currently running air lift shocks at about 45 psi, and I don't like how they screw up the handling. Lots of bounce and roll. would rather have stiffer springs.
Thanks,
Perry
