- Joined
- Jul 20, 2009
- Messages
- 210
- Points
- 3,101
- Age
- 39
- City
- Ontario, Canada
- Vehicle Year
- 1994
- Transmission
- Automatic
Hey, been reading on here and other ranger forums and have found a few different answers to the colour of the oem wiring for these gauges.
Installed a 79' 302 and trying to hook up water temp and oil pressure switch gauges. Can someone please give me some factual information on wire colours so I can hook these up to the stock gauges from the wiring harnesses located on driver side fender.
Ive read that water temp is black w light blue and oil pressure is either green w white or white with red..
I assume these are probably on the same connector ya? I think I found one thats white with pink but it didnt read anything when i hooked it up. Gonna use a voltmeter across them with key in accesory this weekend but just wanna make sure I get the right ones rather than splicing up 20 or so wires from the harness.
I think theres 2 black connectors and 1 grey connector.. is there a bundle that just has all gauges wires, cause that would actually make this alot easier haha.
Installed a 79' 302 and trying to hook up water temp and oil pressure switch gauges. Can someone please give me some factual information on wire colours so I can hook these up to the stock gauges from the wiring harnesses located on driver side fender.
Ive read that water temp is black w light blue and oil pressure is either green w white or white with red..
I assume these are probably on the same connector ya? I think I found one thats white with pink but it didnt read anything when i hooked it up. Gonna use a voltmeter across them with key in accesory this weekend but just wanna make sure I get the right ones rather than splicing up 20 or so wires from the harness.
I think theres 2 black connectors and 1 grey connector.. is there a bundle that just has all gauges wires, cause that would actually make this alot easier haha.
