Wired

need4speed · Jun 12, 2012

Can anyone give me advice on whether or not it is worthwhile to go with ignition kit upgrades? I'm thinking MSD parts for everything (coil, coil pack, ignition, etc.). Anybody have any experience with these on the 4.0? I'm also putting in 19lb injectors and a tuner (if I can find one). Any recommendations for a tuner for my '93 ohv?

holyford86 · Jun 12, 2012

you'll probably lose power swapping the injectors, it wasn't designed to use them from the factory so it will run like crap. If all of the factory ignition stuff is in good shape you won't notice much of anything with the high dollar parts either. Tuners for EEC IV vehicles don't exist either, you add a chip to the service port on the EEC because the EEC is not re programmable like later obd2 stuff.

shane96ranger · Jun 12, 2012

The only "tuner" I know of for the EEC-IV is the "Tweecer" (pronounced tweaker). You put a chip in, as Holyford mentioned, and then you can mess with the tune with a laptop. It's an incredible waste of money for a Ranger though, IMHO. Also, I'm pretty sure 19 lb. is the factory injector size on a 4.0 OHV.

Here is Tweecer's webpage: http://www.tweecer.com/

need4speed · Jun 13, 2012

Thx

Thanks to both Holyford and Shane for the advice. I'm returning to the world of performance upgrades after years of being away. My last frame-off was before fuel injection was even the norm! I would appreciate any and all advice for tuning my '93 4.0 Ranger to a nice mild performance upgrade. I'm not getting around to heads, cam, and headers/exhaust just yet but would love to hear about other bolt-on (or beyond) applications!

shane96ranger · Jun 13, 2012

The best performance upgrade you can do is put a 302 in it. The 4.0, unfortunately, has very limited aftermarket support. Tom Morana is the only place I can even think of with a decent selection of 4.0 parts - but they are pricey.

http://www.moranav6racing.com/category.html?CategoryID=32

Gacknar · Jun 13, 2012

shane96ranger said:
The only "tuner" I know of for the EEC-IV is the "Tweecer" (pronounced tweaker). You put a chip in, as Holyford mentioned, and then you can mess with the tune with a laptop. It's an incredible waste of money for a Ranger though, IMHO. Also, I'm pretty sure 19 lb. is the factory injector size on a 4.0 OHV.

Here is Tweecer's webpage: http://www.tweecer.com/

There is also the QuarterHorse and Binary Editor.
http://www.moates.net/quarterhorse-for-fords.html
http://www.moates.net/binary-editor-2010-for-fords-from-clint-garrity-417.html

But yea, waste of time without serious mods.

need4speed · Jun 14, 2012

Thanks again, Shane. Do you have any advice about whether it's worthwhile to go with an aftermarket radiator and fan setup?

Wired

need4speed

10+ Year Member

holyford86

Some guy with a problem

shane96ranger

15+ Year Member

need4speed

10+ Year Member

shane96ranger

15+ Year Member

Gacknar

15+ Year Member

need4speed

10+ Year Member

Sponsored Ad

TRS Events & Gatherings

Latest posts

Featured Rangers

TRS Latest Video

Official TRS Merchandise

Follow TRS On Instagram

Latest Album Photos

Product Suggestions