- Joined
- Aug 14, 2007
- Messages
- 464
- Points
- 3,101
- Age
- 37
- City
- Edmonton, Alberta
- Vehicle Year
- 2010
- Transmission
- Manual
So it's still not quite done yet, (stinger and I have to shim it so it sits level on the truck) it was late last night. I am thinking i'm going to have to get my stinger mandrel bent, as i was unsuccessful on bending it myself (did not have a bender that was assembled...it was in pieces) AND I kinked my first piece of pipe, cock suckers. Anyways heres how it went about mounting it and what have you, I have to shim it 1/4'' so the outside corners are following the body line and not the crossmember line (where it's attached) It's mounted with 6x4x1/2'' angle that I coped down to 1.5''-2''x 4''.
The steel pile:
Drilling my lugs
that was a sharp bit!
Painted and mounted:
The steel pile:
Drilling my lugs
that was a sharp bit!
Painted and mounted:
