2006 f150 sub box

alright i have a 2006 f150 that i decided to put a sub in. i dont like any of the premade boxes out there so i decided to make my own i used one 4x8 sheet of 1/2 mdf and a whole lotta screws some carpenters glue and caulking to seal it ( no idea if thats right thing to use but its what i had)

unfortuanatly i dont have pics of making the actual box but all i did was take my measurements of how big i wanted it to be and where i could put the sub

i know its waaay too big of a box but i wanted the sub to be just above my armrest centered between the front seats. (also its not as big as it looks there is 3 walls inside the box to make it smaller)

also i dont like fiberglass shiny boxes or regular carpet wrapping so i hit up ebay and ordered some material to wrap it in



using some spray on adhesive i started spraying some glue on and laying out the material starting with the front pulling it tight to avoid wrinkles

i made sure that all my seams would be at the back and bottom that way you cant see them once its in the truck. here it is all wrapped up


the middle seatbelt sticks out of the rear wall so i had to make a recess in the box for it to fit


all done just waiting for everything to dry that way i can hear it.
i had heard it with just the 2 walls but it still wasnt small enough

and heres everything that is gonna go in
jl audio 500watt mono block amp

some powercap dunno what kind we took it outta my buddys cavilier after we rolled it

and heres the sub its a clarion 122w or somthing i cant remember and now its in the box so i can even check but its 2500rms max stable at 4oms

and here it ias all finsished up and ready to go back in the truck

and i may as well throw a pic of the truck in that its going into

except now it has dual antennas behind the cab and the rear end is lifted 2" and has dual exhaust comming out at each corner of the bumper on 45s

Can you take some shots of it inside the truck? And I'm really digging that camo pattern.

looks like a HUGE box


and i while i'm not a fan of the camo (just not my style), I must say you did a fantastic job wrapping it, looks perfect.

its is a huge box on the outside but not the inside and once i get finished making the fire ill go out and get a pic of it in the truck

alright here it is through the winshield not a very good pic but you can see the yellow of the sub

and the seatbelt the i had to make the recess for

then just the rest of the pics i took



and once it warms up i have to do somthing about the wires.... there gonna bug the shit outta me till then though. im the kinda person that i hate seeing any wires or having anything outta place the gf calls it ocd or somthing i unno haha

and again the truck so i can show the lift and such. too bad its winter and the thing is never clean. (mud trucks in front of it too)