2001 ranger lowering kits

[Likibo]

hi! my name is louis and i have a 2001 ford ranger edge v6 3.0L manual transsmision, please i need to know where could i find spindles and lowering leaf spring for my ranger i wanna keep it with the original suspension i'll be very thankful with any help thank you!

[ILLEGALCONCEPTS]

No drop spindle for the Ranger, you'll need to either get coils or the lowered a-arms.

Drop leaves are easy. I have ChassiTech and just about anyone makes them for these trucks. Shop around on those for the best price.

James

[Likibo]

do you think that the djm suspension kit "2/3 inch ranger kit" comes with what i need? I dont want to lower my truck to much! thank you for your reply


http://www.djmsuspension.com/Products/ProductsByMake/Ford/98RangerParts.htm

[bluovaldude]

That kit comes with 2in drop coils and a flip kit for the rear. It will drop your Ranger to give you a nice stance, but almost... almost... everyone ends up wanting to go lower, so I would recomend the 4/5 drop, comes with upper and lower control arms, and a axle flip kit for the rear, get the bolt in c notch, and a good set of drop shocks and you should be satisfied.

But if you are not wanting to go to low, I guess, the 2/3 drop will work nice for you. Just remeber to get some goo drop shocks.

Also if you are only wanting to go with a 2-3 in drop, why not cut a coil out of the front springs, and flip the rear spring hangers ? Nets you a good 2in drop all around, and with a good set of drop shocks you would be satisfied. Total cost of that would be : about $20 for the grade 8 bolts, and about $75 or so for a good set of drop shocks.

It really is your call.... And one last thing... :worthless:

[Likibo]

Well i just want lower it that much cause i got an atv and y have to pass to a bad road and if i had the 4/5 my car will suffer to much but thanks anyway for the help now that i know i'm gonna buy it thank you for your help i'll send pics before and after i put the drop kit!!!

[bluovaldude]

Cool beans man. Keep us updated.