How to keep from busting a rear window?

disciplerocks · Nov 11, 2010

I posted this on another forum, but I want to know if you guys had any ideas. I am looking for a way to keep from busting a rear window while on the trails without building an exo cage.

88_Eddie · Nov 11, 2010

how do you protect those windows without putting something in front of it?
even with an exo cage you could break a rear window if you hit just right. here's some options:

1-dont worry about it
2-build some sort of cage around just the windows with some small diameter tubing
3-take out the glass, modify the window opening and put plexi glass in.
4-stock up on extra glass
5-remove the rear glass
6-choptop it
7-remove rear glass and put a sandbag bunker on each side complete with browning .30 caliber WW2 era belt fed machine guns (remember to pack extra ammo)
8-leave your rig in a garage and sell it on ebay in 60 years for $35,000 (accounting for an increase in average human lifespan and inflation)

pillen140 · Nov 11, 2010

Steel plate lol

disciplerocks · Nov 11, 2010

Lol. I dont want to remove them or chop it. I am not oppossed to putting something in front of it, I just dont want a full cage. I was thinking about running a tube along the top curve from the door to the hatch, but I want it to be a bit more asthetically pleasing than wleding a tube to the body. I was thinking about incorporating it into a roof rack, but it would have to be low. I don't need anymore height to my rig as it is.

4.0B2 · Nov 11, 2010

I've seen people put a "slider" on top and bottom of the window. Not 100% guaranteed but it should help

88_Eddie · Nov 11, 2010

here's what i was thinking i would do. i wanna build my own roof rack as it is, so i was thinking i'd try to protect the back windows while i was there. keep in mind, this isnt to scale, just a rough idea of what i was thinking.

4.0B2 · Nov 11, 2010

That's actually kinda cool... I like that idea. Not for my dd but maybe for the other one I'm looking at..

disciplerocks · Nov 11, 2010

Thats kind of what i was thinking, but without the bottom bar.

4.0B2 · Nov 11, 2010

The bottom bar is a nice addition... It's a slider and a separator for the two down bars.

unoleisu · Nov 11, 2010

I'm toying with the idea of pulling the rear side windows out, and building sheet metal inserts with spare tire mounts suspended down from my roof rack. That way I could carry two extra spares. They would be recessed half in and half out of the window opening. I,m still working out the details in my head.

Shran · Nov 11, 2010

Most Bronco II's I have seen that are actually wheeled just simply don't have rear windows. I'd say just be careful. Exo cages just get hung up on stuff.

4.0B2 · Nov 11, 2010

if the deal goes thru on the other b2 i'm looking at, i'm just chopping top off and saying forget it.. i'm gonna put the side glasses up in the barn as spares for my dd.

88_Eddie · Nov 11, 2010

the side bars on my rack would be pretty close to the body, like shran mentioned, exo cages get hung up on shit. i think you would need the lower horizontal bar to add to the rigidity (did i make that word up?) of the whole thing. you could also make the bars that come down the side removable. put them on when you wheel and take them off when it goes back to DD. use cotter pins or something to keep them together. my exploder is my DD, so i'd just attach mine permanently.

i'm just gonna be careful with my b2, if i break one, i dont know what i'll do. i bet a new window would leak (or maybe just fall out while i'm driving down the road) i'd probably chop the top and figure out a way to make a camper shell fit.

i think the plexi glass route could work too....it would just take some thinking and testing. doubt it would be waterproof though.

why not find a way to make the glass removable? have some kind of lip that it slides in and out of that you could tighten down as well.

4.0B2 · Nov 11, 2010

its a complicated process.. i may just remove the windows the trail rig and make a hard bikini top... does that make sense?? lol but yeah. i really like the side bars with the roof rack idea

disciplerocks · Nov 11, 2010

I posted this over on broncoii.org and someone over there said they replaced them with plexi and it curved in easily and was glued with windshield glue. I would love that idea, but I don't have the patience to make it turn out well.

How to keep from busting a rear window?

July 2011 OTOTM Winner

Well-Known Member

Well-Known Member

July 2011 OTOTM Winner

Well-Known Member

Well-Known Member

Well-Known Member

July 2011 OTOTM Winner

Well-Known Member

New Member

Junk Collector

Well-Known Member

Well-Known Member

Well-Known Member

July 2011 OTOTM Winner

Sponsored Ad

Sponsored Ad

Member & Vendor Upgrades

Truck of The Month

Recently Featured

Follow TRS On Instagram

TRS Events

25th Anniversary Sponsors

Check Out The TRS Store

Sponsored Ad

Sponsored Ad

Sponsored Ad

Amazon Deals