ranger40
New Member
- Joined
- Aug 20, 2007
- Messages
- 5
- Reaction score
- 0
- Points
- 0
- Vehicle Year
- 1988
- Make / Model
- ford
- Transmission
- Automatic
I saw a post yesterday Where Dave R. mentioned that there was
a big difference between no codes and nothing at all showing on the
cel(no flashes at all). I was running the test on my 88 2.3 and i grounded
the st1 terminal and turned the key on and the only lights i saw were the
oil and battery-no cel at any time. - truck will not start btw, was running a little rough at idle but otherwise fine driving to work-upon leaving work it
cranks but doesn't seem to fire. fuel pump and filter replaced 1 year ago.
thanks for any info,
r, john
a big difference between no codes and nothing at all showing on the
cel(no flashes at all). I was running the test on my 88 2.3 and i grounded
the st1 terminal and turned the key on and the only lights i saw were the
oil and battery-no cel at any time. - truck will not start btw, was running a little rough at idle but otherwise fine driving to work-upon leaving work it
cranks but doesn't seem to fire. fuel pump and filter replaced 1 year ago.
thanks for any info,
r, john