- Joined
- Mar 9, 2009
- Messages
- 4
- Points
- 3,001
- Vehicle Year
- 2001
- Transmission
- Automatic
After seeing the results of a search I see I'm not the first one to be told my front end alignment would not take place until my upper control arms and lower ball joints were replaced. I am also now familiar with the 2 piece upper control arm on the right side of my 01 4X4 Ranger with torsion bar suspension. What I have not been able to find any info on is what to do about the bushings on the right side. When looking up parts on websites or ebay the only thing I find is the secondary part of the UCA with the ball joint. I cannot find the primary part of the UCA that has the bushings in it. I feel that as long as the bushings are being replaced with the left UCA it would make sense to replace them on the right as well. Are those bushings available separately? Or do you have to purchase the whole primary part of the right UCA? I have not been able to find a part number or place to purchase either of them. I'm replacing everything else with Moog parts and would like to find Moog bushings for the right side if they're available separately or the whole UCA if necessary.
Anyone have any light they could shed on this?
Thanks in advance for your time and consideration.
Anyone have any light they could shed on this?
Thanks in advance for your time and consideration.
