Rangered build thread


Rangered06

15+ Year Member

Joined
Mar 12, 2009
Messages
290
Points
3,101
City
toledo,ohio
Vehicle Year
2006/1987
Transmission
Automatic
well ive done a lot more to my truck in the past year then id thought would be done so i decided to start a build thread for it to start with ill get everyone upto date with what ive done so far.......

this is how she looked when i first brought her home from the car lot
Rangered build thread


first was the rear bumper guard after i get smacked in the ass by some blonde bimbo
Rangered build thread

total cost $0.00

next came the roll bar in the bed to give me something to mount the lights too
link to the build thread HERE
Rangered build thread

total cost around $100 total

then since i want to keep the rain off the stuff i haul to the inlaws on vacation i custom fitted a cover around my roll bar. the link for the finished for now cover build up can be found here
Rangered build thread

total cost around $20

she has come a long way since i got her and i havent spent much money on the mods since im A: broke and B: custom fab it from what i can get even if its not made for or from a range i.e. the rollbar that was from an F-150 and my next project im working on.........
 
here is the begining to my newest project a brush guard that i found at my grandfathers place just sitting in the weeds i have no clue what its made for but so far i have the center mounted and it dont look half bad next is to finish up the mount on the frame and weld in a crossmember on the front and under the radiator to mount a skid plate to then bend the headlight bars back cause they are straight atm as i do more to it i will add pics to here so without further to do i give u the begining of it

Rangered build thread
 
i really need to pull it off and show just how simple that bar is lol maybe ill get a pic of the back tomorrow after work r1hatman :icon_thumby: lol
 
nice work, I really like it! Lucky find on the pushbar!!!!!!!!!
 
worked out in the heat over a hot welder today and got some stuff togeather so here come some more pics

finished up the brackets now have 3 bolts holding the bar to the frame. 2 underneath and one on the side
Rangered build thread

Rangered build thread


thats 165 lbs standing on the bar i think its pretty solid
Rangered build thread


and this is the back of the "got brakes" bar nice and simple =)
Rangered build thread


and something i threw togeather in a couple hours to haul the bikes to the park to get some excercise lol gotta love how strong bed frames are lol
Rangered build thread

Rangered build thread



what you guys think? :icon_welder::D:icon_welder:
 
nice! ditto on bedframes, they are ubandant too! haha.

likin all that!

How much force can you push against the pushbar till it gives?
 
thanks r1hatman =)
havent put to much pushing force on it yet i can rock the truck back and forth without it giving though =)
 
ok i have a question on what route i should take with the headlight guards i can go 1 of 2 routes with it

1:i could cut about a six inch section out of either side and shorten them while leaving them straight

or

2: i could try to bend the corners in to wrap around the front to give a little more protection to the side markers

what do u guys think here are a couple pics of how they look just clamped on

Rangered build thread

Rangered build thread


i also put in a bar between the brackets i made to add a little more protection and strength to it and to be able to mount my front plate on lol
 
i would like the bent around look but would it be easy to cut the ends off and weld them on instead of bending it around?

like:

___
/ \


if that makes sense

edit:wow that diagram came out stupid


edit#2: if you did do the bending, it would look sweet if it contoured the body line
 
Last edited:
the only issue i have with bending them is the lack of torches to heat it cause those bad boys are pretty damn resilient to bending cold lol i do see what u meant with cutting and welding
 
ya i think welding it would be better but not at a 90 degree angle but at like / ...just my 0.02 cents...its all about what you like most!
 
for some reason that grille gaurd reminds me of the one on the military HMMWV's
 

Sponsored Ad

TRS Events & Gatherings

Featured Rangers

Want to see your truck here? Share your photos and details in the forum.

TRS Latest Video

Official TRS Merchandise

Follow TRS On Instagram


Product Suggestions

Back
Top