spring removal


roughranger

15+ Year Member

Joined
Oct 25, 2007
Messages
71
Points
3,101
Vehicle Year
94
Transmission
Manual
ok i am tryig to trade my front springs out on my 87 Bronco II. i have tha shocks out and am ready to remove the spring but i cant get the nut off of the bottom of the spring. there is a rivet in the way of turning te nut. am i doin something wrong or what? thanks rough
 
ok i am tryig to trade my front springs out on my 87 Bronco II. i have tha shocks out and am ready to remove the spring but i cant get the nut off of the bottom of the spring. there is a rivet in the way of turning te nut. am i doin something wrong or what? thanks rough

Within the coil spring you will see a threaded bolt, with a nut at its base. If it is the same as mine, it is a 28mm nut. That is what you need to pull up. Don't loosen the nut on the underside of the beam.
 
that nut is what i am talkin about, i cant get a socket on the nut because there is a rivet that is right beside the flat side of the nut. i cant get a socket on it and the rivet is in the way of turning the nut! i hope you are understanding what iam saying! thanks rough
 
Can you maybe grind off the rivet or even cut it with a saw? I didn't have one on either side of my truck.... You can also use an 1 1/8" socket/wrench if all you have is standard.
 
Yo,
Is this 2WD or 4WD? And can you take a picture of the nut/rivet you are reffering to?
 
Yea I would like to see photos as JFA requested... I don't think I have ever run into that problem.

The first time I took it off, I had to soak it in PB for quite a while.. but it doesnt sound like that is your problem.
 
i dont have a digital camre so i cant take a pic. sorry i am goin to look at it again this evening and hopefully find somethin out.... thanks rough
 

Sponsored Ad

TRS Events & Gatherings

Latest posts

Featured Rangers

Want to see your truck here? Share your photos and details in the forum.

TRS Latest Video

Official TRS Merchandise

Follow TRS On Instagram


Product Suggestions

Back
Top