Gear Ratio Question

[letsgetthisdone]

I need you rhelp guys. I have a '92 ranger with a 4.0 v6, auto tranny, andan 8.8 rear-end.

i bought the truck with 32" tires on it so i have no idea what the stock tire size was.

It currently has a 3.07 rearend ratio. I do mostly high speed "prerunner" style offroad driving, but there are those tight spots where i can tell i just need lower gears.

I was thinkin 4.10's or 4.30's would be a good choice. and my motor is spinnin about 2,200 rpms at 60 mph, in THIRD gear. it won't pull overdrive on the freeway.

thanx in advance,

-sean

[4x4junkie]

If you're sticking with the 32s, I'd go 4.30.
If you think you might want to run 33s in the future, go with 4.56.

Welcome to the site. :beer:

[Wicked_Sludge]

if your curious, the sticker on your drivers door sill tells you what tires came stock on the truck. i'd guess something like 235/75/15's.

[letsgetthisdone]

it says ihe truck can carry its max load rating with 235/75r15, but i don't think that was the original tire size on the truck....

i found it out just from discout tire that it either had


195/70r14's or 215/70r14's


damn thats tiny.


i'm not gonn go 33's ever with this truck. It'll eventually have 35's when its fully done-up prerunner.

but thats gonna come to the tune of about $25,000, which i don't have right now.

So 4.30's are gonna be my best choice then.

Thanx a bunch guys