Suspension questions


98Mazda4X4

98Mazda4X4

15+ Year Member

Joined
Oct 2, 2009
Messages
29
Points
3,101
Vehicle Year
1998
Transmission
Manual
i plan on putting 3 inch blocks on the back and doing a t-bar crank on the front on my 98 mazda B3000. how big of a tire could i go and does anybody have any pics of a ranger or a mazda on a 3 inch lift.
 
i would say 31's or 32's but i would go with a 2 in block so your sure it sits level, you could always do that and add a 3in body lift for around $100 then you could definatly clear 33s or 34s or cheap coil spacers.....look on my profile for pics i have a 2in body and 3in suspension with 33's.

look in the tech fourms under lifting for cheap it has exactly what your looking for.
 
Does yours already have the factory 2 inch blocks? (that say pink and blue under them... never understood that)

I personally would never go bigger than a 2" block.
 
it came factory with 2 1/4 blocks on the rear axle and i was goin to go to a 3 inch block or a 4 inch block
 
So... it sits the same as other 98+ 4x4 rangers correct?

Crank the t-bars slightly, leave the rear and you can run 265/75/16 (if you have 16's) which are approximately 32's, and with higher offset wheels you can run 33's.

You will/need to be more concerned about your front suspension than the rear imo.
 
yea it sits the same as the rangers and i have 30's on it now but have room for more
 
You must log in or register to reply here.

Sponsored Ad

TRS Events & Gatherings

Where We Were in 2025 – The Ranger Station

Latest posts

Featured Rangers

Want to see your truck here? Share your photos and details in the forum.

TRS Latest Video

Official TRS Merchandise

Follow TRS On Instagram

Latest Album Photos

IMG_4690.JPEG
IMG_4689.JPEG
IMG_4688.JPEG
IMG_4679.JPEG
IMG_4656.JPEG
IMG_4625.JPEG
IMG_4562.JPEG
IMG_4561.JPEG
IMG_4560.JPEG
IMG_4559.JPEG
IMG_4558.JPEG
IMG_4445.JPEG

Product Suggestions

Back
Top