• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

stupid tick or knock


majorranger1

New Member
Joined
Oct 20, 2007
Messages
4
Reaction score
0
Points
1
Location
Ontario, Canada
Vehicle Year
1989
Make / Model
highrider STX
Engine Size
2.9
Transmission
Manual
Hi guys or gals. I have this tick (kind've a knock) Sounds like it's a hole in my header (big hole) But I don't. It's a 2.9 L (89) I've tightened my lifters down as they were clacking earlier. So that's doesn't seem to be the problem. I read something on here about the injector's knocking or making noises. I don't understand how they could make any noise at all.But anyways any help would be apreciated. It's driving me nuts!!!. also it doesn't make the noise when I first start it. And hasn't dropped in power or torque at all since it started. Take care ford lover's
 


IMenriched

New Member
Joined
Aug 7, 2007
Messages
1,507
Reaction score
4
Points
0
Age
60
Location
NE Iowa John Deere country
Vehicle Year
1986
02'
Make / Model
ford
Engine Size
2.9 & 5.4
Transmission
Automatic
Hi guys or gals. I have this tick (kind've a knock) Sounds like it's a hole in my header (big hole) But I don't. It's a 2.9 L (89) I've tightened my lifters down as they were clacking earlier. So that's doesn't seem to be the problem. I read something on here about the injector's knocking or making noises. I don't understand how they could make any noise at all.But anyways any help would be apreciated. It's driving me nuts!!!. also it doesn't make the noise when I first start it. And hasn't dropped in power or torque at all since it started. Take care ford lover's
check your oil pressure....
 

Psychopete

Well-Known Member
Joined
Aug 10, 2007
Messages
3,201
Reaction score
29
Points
48
Location
FW, IN
Transmission
Automatic
check your oil pressure....
+1

I cracked a head on my '88, eventually the oil pressure dropped (showed on the stock gauge even). I got off the highway one day, and the motor just start making a gnarley ticking/knocking (clunk, clunk, clunk..). I parked it after that. I ended up pulling/rebuilding the engine, the mains were good, rod bearings had a little copper showing. Not sure about the cam bearings, had the machine shop dick around with that. It was the first rebuild I did, still going 4 year later..

Pete
 

drew15

New Member
Joined
Dec 30, 2007
Messages
22
Reaction score
0
Points
0
Age
34
Vehicle Year
2002
Make / Model
Ford Ranger Edg
Transmission
Automatic
with the tick

hey i had the same thing i forget what year the 2.9L came with the lifter that u can ajust that might be the problem and if not put osme no smoke in the oil becasue it is think and it will not tick that is all i did hope that help alter drew
 

Jspafford

Logan Andrew Feb 17, 2012
V8 Engine Swap
TRS Banner 2010-2011
Joined
Jan 2, 2001
Messages
8,012
Reaction score
15
Points
38
Age
40
Location
Lancaster, Ohio
Vehicle Year
2016
Make / Model
Chevy 3500HD
Engine Type
V8
Engine Size
6.6L
Transmission
Automatic
2WD / 4WD
4WD
Total Lift
5"
Tire Size
35"
The tick from the injectors is quite common. Usually it will become non audible when the motor is revved, where as an oil pressure problem will be more noticeable when revved.

The injectors tick as they fire, mine's done it for 50K and still runs like a top.
 

Sponsored Ad


Sponsored Ad

Members online

Today's birthdays

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Latest posts

Truck of The Month


Shran
April Truck of The Month

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Follow TRS On Instagram

TRS Events

25th Anniversary Sponsors

Check Out The TRS Store


Sponsored Ad


Sponsored Ad

Sponsored Ad


Amazon Deals

Top