Removal issues

89PBR96 · Feb 27, 2010

Ok I have a 3.0 ranger 94 5 spd and the manifold gaskets are leaking so I started to take the passenger side off and snapped 3 bolts off so now I have it tore apart

I am having trouble getting the ac pump bracket off any pointers on this I have had it up to :beer:

I removed the 4 bolts that hold the ac pump on the bracket and one bolt out of the front of the bracket it self I want to remove the drivers head so I can hopefully not break any more studs

If you need more info let me no thanks for any help guys :icon_cheers:

BRUTUS_T_HOG · Feb 27, 2010

there are 2 or 3 bolts on the driver's side of the engine block at the bottom

89PBR96 · Feb 28, 2010

I got it had to take the tensioner off to get them thanks

Big Jim M · Feb 28, 2010

I would never do that job with the radiator still in the chassis.. Also I wouldn't do it without changing out the coolant pump and the thermostat.. Just a hint.
Big JIm

89PBR96 · Feb 28, 2010

Big Jim M said:
I would never do that job with the radiator still in the chassis.. Also I wouldn't do it without changing out the coolant pump and the thermostat.. Just a hint.
Big JIm

More money It's always something isn't it

t0x1k · Feb 28, 2010

I plan on tackling this same project, except I'm going to use a close quarters drill and drill out the exhaust bolts. I don't have time or funds to remove the heads and replace all the non leaking gaskets.

89PBR96 · Feb 28, 2010

It's my third vehicle so no big deal besides the pita to do it

Removal issues

89PBR96

15+ Year Member

BRUTUS_T_HOG

15+ Year Member

89PBR96

15+ Year Member

Big Jim M

15+ Year Member

89PBR96

15+ Year Member

t0x1k

15+ Year Member

89PBR96

15+ Year Member

Sponsored Ad

TRS Events & Gatherings

Latest posts

Featured Rangers

TRS Latest Video

Official TRS Merchandise

Follow TRS On Instagram

Latest Album Photos

Product Suggestions