joshuab
New Member
- Joined
- Dec 17, 2007
- Messages
- 1
- Reaction score
- 0
- Points
- 0
- Vehicle Year
- 2003
- Make / Model
- Ford
- Transmission
- Automatic
Hello... This is my 1st post on this site and thanks for making it available!
I have a 2003 Ranger with a 2.3L 4-Cylinder and automatic transmission.
When the ranger is warm and at a stop it will not move while in drive or 1st gear on the shifter. If I move the shifter to 2nd gear the truck will go just fine.
When the truck is cold the truck will not move while the shifter is in drive, but if you manually put it in 1st on the shifter it will drive in first like normal. After a few minutes and warm 1st gear is no good again.
Any suggestions?
Thanks!
Joshua
I have a 2003 Ranger with a 2.3L 4-Cylinder and automatic transmission.
When the ranger is warm and at a stop it will not move while in drive or 1st gear on the shifter. If I move the shifter to 2nd gear the truck will go just fine.
When the truck is cold the truck will not move while the shifter is in drive, but if you manually put it in 1st on the shifter it will drive in first like normal. After a few minutes and warm 1st gear is no good again.
Any suggestions?
Thanks!
Joshua