cable clutch?
- Thread starter kylezx10
- Start date
Why are you using a T-5?
- Joined
- Aug 9, 2007
- Messages
- 5,103
- Points
- 3,101
- Age
- 79
- City
- C. Wisconsin
- Vehicle Year
- 2003
2000
199
- Transmission
- Manual
Some have tried the cable system after trying to get the hydraulic system to work but it's not that hard. Even since '05' the Mustangs use the hydraulic set-up. Think I paid under $50 for the correct Ranger petal and master cylinder, they actually threw in an extra master.
Dave
Dave
- Joined
- Nov 12, 2008
- Messages
- 1,347
- Points
- 3,101
- City
- Nova Scotia Canada
- Vehicle Year
- 1997
- Transmission
- Manual
Use the search.
The hydraulic is quite easy, as it bolts in to the Ranger.
Want to use stock parts?
7/8 master from an '89 V6 (search napaonline for the correct part number). Oh, shoot, I said search.
Slave form an '83/'84 Ranger diesel will get a slave that can mount to a pice of angle, an '83/'84 slave for a 2.8 will mount to a pice of flat plate.
These
http://www.summitracing.com/parts/RUS-640281?autofilter=1&part=RUS-640281&N=700+115&autoview=sku
And a piece of -3AN tubing will link it all together.
After market, try this, most of the way down:
http://dazed.home.bresnan.net/test
The cable is easier than the interntz will tell you, search the 60's Mustang sites. Crap, I used the "S" word again.
The hydraulic is quite easy, as it bolts in to the Ranger.
Want to use stock parts?
7/8 master from an '89 V6 (search napaonline for the correct part number). Oh, shoot, I said search.
Slave form an '83/'84 Ranger diesel will get a slave that can mount to a pice of angle, an '83/'84 slave for a 2.8 will mount to a pice of flat plate.
These
http://www.summitracing.com/parts/RUS-640281?autofilter=1&part=RUS-640281&N=700+115&autoview=sku
And a piece of -3AN tubing will link it all together.
After market, try this, most of the way down:
http://dazed.home.bresnan.net/test
The cable is easier than the interntz will tell you, search the 60's Mustang sites. Crap, I used the "S" word again.
- Joined
- Jul 11, 2009
- Messages
- 84
- Points
- 3,101
- City
- Dearborn heights mi
- Vehicle Year
- 1991
- Transmission
- Automatic
So how much do you have to change to make it a cable clutch? You don't need a new pedal do you?
Last edited:
- Joined
- Aug 3, 2009
- Messages
- 555
- Points
- 3,101
- Vehicle Year
- 84
87
- Transmission
- Manual
Let's see... To go to the cable thing, find a Mushtang that still has the pedal setup with the "quadrant" parts still on it, figure out how to mount the cable housing ferrule to the Ranger fire wall, and then copy the Mushtang from there. Oh, and learn to look forward to periodic cable stretch and adjustment, broken quadrant bellcranks, and replacement cables. Enjoy!
- Joined
- Nov 12, 2008
- Messages
- 1,347
- Points
- 3,101
- City
- Nova Scotia Canada
- Vehicle Year
- 1997
- Transmission
- Manual
Take a look at your headers, too.
Sponsored Ad
TRS Events & Gatherings
Latest posts
-
-
-
2.5L ('98-'01) Valve Cover options for 2.5l Lima engine- Latest: scotts90ranger
-
-
-
-
-
-
-
Featured Rangers
TRS Latest Video
Official TRS Merchandise
Follow TRS On Instagram
