- Joined
- Dec 23, 2009
- Messages
- 23
- Points
- 3,101
- Vehicle Year
- 1997
- Transmission
- Automatic
i have a 97 mazda b2300, and i want to lower it more.
i bought a set of used 3 inch drop beams made by bell tech and on 18s it still sets high with lots of wheel gap. it has Camber / Caster Bushing - Front Susp 1 degree adjsuters. i have a read a few forums and there is a kit from napa auto parts part number NCP 2643950 and supposibly they can adjust up to 4 degrees? if so i am going to buy drop coils and go another 2 inches. i work at a shop and have alignment machine. right now the alignment is at -2 barely in green and they are adjusted as far as they can. tires are to expensive to chew of the front of this thing. any help is great. i could be wrong on the ones from napa. if anyone has any info please lmk thanks
i bought a set of used 3 inch drop beams made by bell tech and on 18s it still sets high with lots of wheel gap. it has Camber / Caster Bushing - Front Susp 1 degree adjsuters. i have a read a few forums and there is a kit from napa auto parts part number NCP 2643950 and supposibly they can adjust up to 4 degrees? if so i am going to buy drop coils and go another 2 inches. i work at a shop and have alignment machine. right now the alignment is at -2 barely in green and they are adjusted as far as they can. tires are to expensive to chew of the front of this thing. any help is great. i could be wrong on the ones from napa. if anyone has any info please lmk thanks
