PDA

View Full Version : interchangable parts list


twoll86
12-16-2009, 04:44 AM
i think we should have a list of know parts the interchang between different years and generations such as fenders,cabs,doors,engine parts,computers, and so on

what got me thinking about this is i was wondering what it takes to put a 98+ front clip on a 93-97 ranger

stegomon
12-16-2009, 09:12 AM
you need the fenders hood and radiator support. i looked into it...you can mod the current rad support and fenders to take the newer nose . i dont know how but i have seen it done...

ozziemo27
12-17-2009, 04:09 AM
This sounds like a good idea! bump! it'd really simplify alot of things

UrbanRedneckKid
12-17-2009, 04:44 AM
Just search for it. The question has be asked way more times than I can remember.
Though it's pretty simple, If it looks the same, it'll probably fit.
But one thing most don't know is all the body mounts are in the same places on all of em. Meaning, a 2010 body will bolt up to a 83 chassis.

Just search it. It's all there.

twoll86
12-18-2009, 12:39 AM
i know its all here i just thought we should have it a list of things like that in the tech libary for example the body mount thing i had no clue the bodys would swap from 83-2010

Colin
12-18-2009, 01:44 AM
agreed

Ranger#1
12-18-2009, 12:50 PM
how would we go about creating something like this i could make a thread labeled u know like engine drive train chassis body interear seats ....... and when someone adds info ill add it into the correct spot in my original post and then defeat your post to keep it clean

twoll86
12-19-2009, 07:54 AM
ok so what i know

1st gen and 2nd gen doors swap
1st and 2nd gen beds swap
2.9 and 4.0 swap fairly easy
seats swap from 1st gen and 2nd gen

chvlfrk
12-19-2009, 08:24 AM
I have built 2 gen 3's (93 & 94) and am workin on 2 more (94 & 95), so I will tell what I have found within these builds, but if you need to know other info, I have the ability to check via Ford catalogin at work:

93-97 fenders, hood, front bumper, grill, headlights, marker lights are a direct swap.
93-94 radiator supports are same and 95-97 are same (2 different PN's)
93-97 doors interchange
93 to 08 beds are direct bolt ons and taillights are interchangeable
92-02 Explorer rearends are direct bolt-in if you want 4" of drop in the rear, if don't want the drop, then you have to weld on new leaf spring perches
92-02 Explorer seats will bolt right in after you swap the Ranger tracks to them, the Explorer seats have the holes made into them for the tracks
93-97 cabs are interchangeable, as are 98 up
82-97 steerin boxes are interchangeable to include the MS boxes
82-94 heater boxes interchange, as does 95-97

I'm sure I'll think of more, but that's all I can think of for now!:icon_confused:

Ranger#1
12-19-2009, 11:30 PM
we need a parts interchange list:icon_idea: [CREDIT GIVEN TO ORIGINAL IDEA OWNER]:icon_twisted: so im going to take head of the need and make one up:thefinger: its going to be divided in to categories

BODY {ext}
93-97 fenders, hood, front bumper, grill, headlights, marker lights are a direct swap.
93-94 radiator supports are same and 95-97 are same (2 different PN's)
93-97 doors interchange
93 to 08 beds are direct bolt ons and taillights are interchangeable
93-97 cabs are interchangeable, as are 98 up
2010 body will bolt up to a 83 chassis



BODY [int]
92-02 Explorer seats will bolt right in after you swap the Ranger tracks to them, the Explorer seats have the holes made into them for the tracks
1st gen and 2nd gen doors swap
1st and 2nd gen beds swap



INTERIOR



ENGINE


V6 2.9


V6 3.0


V6 4.0




V6 4.0SOHC


2.3




2.5



TRANSMISSIONS





TRANSFER CASE





REAR AXLE
92-02 Explorer rearends are direct bolt-in if you want 4" of drop in the rear, if don't want the drop, then you have to weld on new leaf spring perches





FRONT AXLE TTB




FRONT AXLE TIB





FRONT AXLE A ARMS




STEERING
82-97 steerin boxes are interchangeable to include the MS boxes




ENGINE ELECTRICAL





BODY ELECTRICAL






WHEELS
All Bronco II, Explorer, and Ranger wheels match bolt patterns. As for center holes I am unsure.
Acura
Legend 1991-99

AMC
Most models 1940-89
Ambassador 1960-83
American 1960-83
AMX 1960-83
Classic 1960-83
Concord 1960-83
Eagle (44) 1980-89
Gremlin *
Hornet 1960-83
Javelin 1960-83
Marlin 1960-83
Matador 1960-83
Pacer 1960-83
Rambler 1960-83
Rebel 1960-83
Spirit 1960-83
SX4 (44) 1980-89

Chrysler/DeSoto 1937-89*
300 1958-88
Concorde 1993-99
Cordoba 1975-83
Custom 1958-88
Fifth Avenue 1985-89
Imperial 1974-83
Le Baron 1978-81
New Yorker 1958-88
1993-99
Newport 1958-88
Sebring 1995-99*
Town & Country 1958-88


Datsun/Nissan
1600-2000 1965-73
300ZX, 200SX V6 (some) to 1989

Dodge
All full size cars 1937-89*
A100 1963-71
Aspen 1973-80
Avenger 1995-99
B100 1972-86
B200 1974-85
Caravan 1987-99
Challenger 1957-77
Charger 1957-77
Coronet 1957-77
D100 1972-86
D200 1974-85
Dakota 1987-90
Dart 1973-80
Demon 1973-80
Diplomat 1978-89
Interpid 1993-99
Magnum 1957-77
Mirada 1975-83
Monaco 1957-77
1990-92
P200 1974-85
Polara 1955-77
Ram 150 (ex HD) 1972-86
Ram 250 (ex HD) 1974-85
Ram Charger 1974-85
Sport 1973-80
St. Regis 1975-83
Swinger 1973-80
Volare 1973-80
W100 1972-86

Eagle
Talon 1989-97
Vision 1993-97

Ford
All full size cars 1949-72
1979-85
Aerostar 1986-97
Bronco II 1983-90
Crown Victoria 1979-Current
Country Squire All Years*
Custom 1965-85
Explorer 1991-Current
F-100 1980-85
Fairlane 1962-79
Falcon 1968-71
Futura 1965-85
Glaxie 1965-85
Granada All Years*
LTD 1971-80*
Maverick 1971-80
Monarch All Years*
Mustang 1965-73
SVO 1985-86
1994-Current
Mustang II 1974-78
Probe 1989-98
Ranchero 1968-84
Ranger All Years
Thunderbird 1955-71
1977-79
Torino 1971-80

Hudson
All 1948-56

Jeep
Cherokee (XJ) 1984-01
Wagoneer (XJ) 1984-89
Brairwood (XJ) 1984-91
Comanche (MJ) 1984-92
Grand Cherokee (ZJ) 1993-98
Wrangler (YJ) 1987-95
Wrangler (TJ) 1997-06
Liberty (KJ) 1902-present

Lexus
SC430 *
Other Lexus *

Lincoln
All 1970-72
1980-89
Aviator 1902-Current
Continental 1986-Current
Mark III-VII All Years*
Town Car All Years*

Mazda
323 1981-89
626 1987-99
B-Series 1994-Current
GLC 1981-89
Millenia 1994-97
MPV 1984-95
MX6 1986-99
Navajo 1991-95*
RX7 (any 5 lug car)

Mercury
All full size cars 1952-54
1961-72
1979-85
Capri All Years
Colony Park All Years*
Comet 1971-80
Cougar 1967-79
Grand Marquis All Years*
Marauder 1902-Current
Meteor All Years*
Monarch 1971-80
Montclaire All Years*
Monterey All Years*
Montego All Years*
Parklane All Years
Villager 1989-97

Mitsubishi
3000 GT All Years*
Diamante 1991-02
Eclipse 1990-02
Galant 1999-02

Nissan
240SX 1995-99
300ZX 1990-96
Altima 2002*
Maxima 1989-02

Plymouth
All full size cars 1937-89
Barracuda 1970-74
Belvedere 1957-80
Duster 1973-80
Fury 1957-80
Laser 1989-96*
Satellite 1957-80
Savoy 1957-80
Scamp 1973-80
Trail Duster (ex 44) 1974-85
Valiant 1973-80
VIP 1957-89
Volare 1973-80
Voyager 1988-95

Pontiac
Tempest, LeMans 1961-63

Studebaker
All 1951-66

Toyota
2WD P.U. 1969-89
Camry 1992-99
MR2 1991-99
Previa 1991-95
Supra 1986-91

Volvo
122 All Years*
1800 All Years*





FRONT SUSPENSION





REAR SUSPENSION

Ranger#1
12-19-2009, 11:33 PM
http://www.therangerstation.com/forums/showthread.php?t=68952:icon_twisted:

UrbanRedneckKid
12-20-2009, 04:05 PM
...
82-97 steerin boxes are interchangeable to include the MS boxes
...

I'm sure I'll think of more, but that's all I can think of for now!:icon_confused:

The entire F-series shares that same box too.

twoll86
12-22-2009, 04:15 AM
quoted from Kunar


Seems every other week somebody is misinformed about the high rider or asking about it in one way or another so here is what i have come up with. my info came from either a ford factory 1987 ranger brochure, an ad from feb 1987's field and stream or from guys here at TRS along with my own experience

High Rider became available in 1987 only on regular cab stx models. "A list of 21 unique components was required to give the STX High Rider it's increased vehicle height and greater handling performance" including a front mounted sway bar, a redesigned rear sway bar, new revalved gas shocks, new leaf springs, revised brake components, front drive shaft and transfer case. 140 Hp 2.9L V6 was standard with this package. (from factory brochure)

All high rider trucks are STX models which includes "special accenting, sporty trim, tinted glass, black foldaway mirrors, black grille and bumpers, and new tape treatment" (from field and stream)

"STX features reclining cloth bucket seatsin the Regular Cab model, or dual cloth Captain's Chairs with individual recliners and power lumbar supports in the SuperCab. The door trim panels are cloth-covered and include carpeted map pockets. The steering wheel is wrapped in genuine leather. Standard sound system is electronic AM/FM stereo with digital clock and four speakers. In STX you also have pivoting front vent windows for added ventilation, a convienent trip odometer, and a tachometer on the instrument cluster to read the pulse of the STX's electronically fuel-injected 2.9 liter V-6 engine." (from factory brochure, also noted on the page that some equipennt may be optional)

STX models came standard with Handling package (included front and rear sway bars), cloth buckets, tach, black rear step bumper, 2.9, tinted glass, etc etc. I have charts that show all available options and all equipment packages i would like to try to scan and make available here. I also have pictures of standard TTB brackets VS High Rider brackets i will post as soon as i can

twoll86
12-27-2009, 07:57 PM
a 1991-92 2.9 uses the same condenser core as a 1991-94 Explorer
where instead of having both connections on the passenger side of
the condenser, and thus requiring a hose to cross over the fan shroud.
But the later condenser has the high pressure connection on the drivers side.

IF you use that style condenser then when you swap to a 4.0 you only
need to replace the compressor and the manifold line that connects the
compressor into the rest of the system.

Though on the 2.9 condenser these are seperate lines, on the 4.0
it is a one piece manifold that bolts to the compressor.

When yo get the 4.0 lines make sure to get the 1993 style where
the low pressure suction line from the evaporator back to the
compressor crosses the FRONT of the engine the other style that runs
across the back has an extra TWO crimp connections and thus two
extra places to leak.

copied post from AD

mwood1985
12-27-2009, 08:48 PM
[QUOTE=Ranger#1;590804]2010 body will bolt up to a 83 chassis.


How in the hell did we figure this one out?

whocares
12-29-2009, 10:46 PM
1995 Mustang seats are a direct bolt in using your RBV seat tracks...if I knew more about Mustangs I could tell you the other years too, but someone can chime in with it.

twoll86
12-30-2009, 10:52 AM
1995 Mustang seats are a direct bolt in using your RBV seat tracks...if I knew more about Mustangs I could tell you the other years too, but someone can chime in with it.

79-04 mustang seats are a direct swap with rbv tracks

adsm08
01-02-2010, 11:18 PM
The M5OD bolts into place of the A4LD and FM146 as long as the number of cylinders on the donor and recipient match.

If replacing an FM145 you need to find a drive shaft of appropriate length for your vehicle (4.0 M5OD shaft from a vehicle with same wheelbase) and move the trans cross-member brackets to the rear holes. Shifter plates for the floor board have to be modified slightly or there is a hole in your floor the size of my head (see my album).

1350 to 1354 t-case swap is fairly direct bolt in. You may need the linkage and definitely the front d-shaft from the donor.

twoll86
07-26-2010, 06:20 AM
bump

feellnfroggy
08-07-2010, 01:46 PM
[QUOTE=Ranger#1;590804]2010 body will bolt up to a 83 chassis.


How in the hell did we figure this one out?

I'd like to know this too, I thought there was some minor frame differences, has anyone completed the swap?

twoll86
08-07-2010, 03:31 PM
ive seen a 91 body on a 99 frame with the 99s dash and engine and some other interior parts

Grenth89Ranger
08-07-2010, 04:56 PM
I am very interested in parts that will fit my 89 ranger... upon a visual experiance i noticed that the headlights from bronco and some explorers but unaware of the years used,l will fit my 89 ranger....

i am also interested in what type of bucket seats will fit with little to no modification on my 89 ranger im really hating this bench style seat that is falling apart , and would like to place cup holders and possibly some speakers in the center ....

thanks in advance and im hoping this is the right section to place this in .. if not im sorry

twoll86
08-08-2010, 01:08 PM
I am very interested in parts that will fit my 89 ranger... upon a visual experiance i noticed that the headlights from bronco and some explorers but unaware of the years used,l will fit my 89 ranger....

i am also interested in what type of bucket seats will fit with little to no modification on my 89 ranger im really hating this bench style seat that is falling apart , and would like to place cup holders and possibly some speakers in the center ....

thanks in advance and im hoping this is the right section to place this in .. if not im sorry

89-92 ranger 89-90 b2 and 91-94 explorer headlights

as far as seeat b2 ranger and explore seats withranger tracks

Grenth89Ranger
08-08-2010, 02:03 PM
89-92 ranger 89-90 b2 and 91-94 explorer headlights

as far as seeat b2 ranger and explore seats withranger tracks

thank you so much .. njow when u say ranger tracksdoes this mean you can directly bolt on those tracks or do u need to shim and other modification ... (Really sorry but never really have done much interior work on any vehicle except paint, and clearcoating lol thanks so much btw im glad i have joined this forum :) )

feellnfroggy
08-08-2010, 04:48 PM
For what its worht my 93 ext cab took a set of leather power buckets from a 99 expo without modification. Same bolt pattern, I havent wired it up yet though. Ill do a build thread when/if I do.

twoll86
08-09-2010, 12:33 AM
thank you so much .. njow when u say ranger tracksdoes this mean you can directly bolt on those tracks or do u need to shim and other modification ... (Really sorry but never really have done much interior work on any vehicle except paint, and clearcoating lol thanks so much btw im glad i have joined this forum :) )

bolt right up and actually ive put f150/bronco buckets in just hade 2 dill the rear holes

Grenth89Ranger
08-10-2010, 03:53 AM
bolt right up and actually ive put f150/bronco buckets in just hade 2 dill the rear holes


sweet .. what year of F- 150 .. i might have access to a free pair of buckets from an f-150 at my grandpas :)

twoll86
08-10-2010, 11:29 PM
it was an early 90s

Grenth89Ranger
08-11-2010, 05:57 AM
ok sweet thank you very much

twoll86
08-11-2010, 04:50 PM
np

alwaysFlOoReD
08-29-2010, 11:12 AM
A list of vehicles that the manual steering box comes in. Copied from E-bay seller;

FORD F100 PICKUP 83 Manual Steering; from 3/83 (tag SMK-C)
FORD F150 PICKUP 83 Manual Steering; from 3/83 (tag SMK-C)
FORD F150 PICKUP 84-90 Manual Steering
FORD F250 PICKUP 83 Manual Steering; from 3/83 (tag SMK-C)
FORD F250 PICKUP 84-90 Manual Steering
FORD F350 PICKUP 83 Manual Steering; from 3/83 (tag SMK-C)
FORD F350 PICKUP 84-90 Manual Steering
FORD VAN 02 Manual Steering; (E450), w/o ch cab
FORD VAN 83 Manual Steering; from 3/83 (tag SMK-C)
FORD VAN 84-90 Manual Steering; tag SMK-C
MAZDA B-2300 94-97 Manual Steering
RANGER 83-85 Manual Steering; 4x2
RANGER 85 Manual Steering; 4x4, from 11/84
RANGER 86-97 Manual Steering

83RangerBill
09-08-2010, 12:38 AM
Does any one know what power steering pump pulleys interchange with the 83 ranger 2.8. Sorry looked online and at the local parts stores and couldn't find one that would work. Sorry if this is in the wrong forum. Thanks for all the help.

exbass94
09-08-2010, 05:33 PM
The M5OD bolts into place of the A4LD and FM146 as long as the number of cylinders on the donor and recipient match.


No they won't....3.0 and 4.0 have same number of cylinders (6) but are not interchangable. Also the Duratec 4 cyls have a different bolt pattern from the Lima 4 cyls.

ForOffRoadDriving
09-08-2010, 06:35 PM
No they won't....3.0 and 4.0 have same number of cylinders (6) but are not interchangable. Also the Duratec 4 cyls have a different bolt pattern from the Lima 4 cyls.

+1, I wish things were as simple as count the cylinders and swap, but it just wouldnt be a ford then.

leenco12
09-09-2010, 12:10 AM
This sounds like a good idea! bump! it'd really simplify alot of things

Just search for it. The question has be asked way more times than I can remember.
Though it's pretty simple, If it looks the same, it'll probably fit.
But one thing most don't know is all the body mounts are in the same places on all of em. Meaning, a 2010 body will bolt up to a 83 chassis.

Just search it. It's all there.

AllanD
09-09-2010, 12:08 PM
And any truely comprehensive answer to this question would start to look like the manhattan yellow pages, two THICK volumes, thin paper and tiny print...

AD

rbill2k3
01-11-2011, 07:07 AM
What about body parts between the explorer/b2300 and the ranger? My ranger grill/headlights are busted, will explorer or B2 fit, or do I have to switch the fenders/doors as well?

ozziemo27
01-11-2011, 02:05 PM
Just search for it. The question has be asked way more times than I can remember.
Though it's pretty simple, If it looks the same, it'll probably fit.
But one thing most don't know is all the body mounts are in the same places on all of em. Meaning, a 2010 body will bolt up to a 83 chassis.

Just search it. It's all there.

The whole point of this would be to make something organized, and include information that hasn't been asked. Alot of the times I search for an interchange, its something that hasn't been asked. There are ALOT of grey areas for part interchangability.

Ranger Sport Honduras
01-11-2011, 11:15 PM
i got a few.
mirrors will interchange between 93-05 (non power) 06+ will fit with minor mods.
tail lights will interchange from 93-99. 00+ will fit but will require minor mods.
window cranks will interchange from 93-11
beds will interchange from 93-11(long bed, short bed, flare sides)
rear bumpers will interchange between 93-11(chrome, painted, basic model bumpers)

RollinWOT
01-11-2011, 11:43 PM
Thanks for the info on the body parts that interchange Honduras! Nice new profile pic btw.

squidget
01-12-2011, 12:06 PM
It would almost behoove us to build it into a database. Something simple and searchable.

RollinWOT
01-12-2011, 05:15 PM
Exactly my thoughts squidget! Great minds think alike.

ranger_mclaren
01-17-2011, 08:41 AM
I don't know about the 2.8, 3.0, or 4.0 cause i've never owned any of those but the 2.0, 2.3 and 2.9 all share the same starter solenoid and ignition coil with the 5.0 (302), and 5.8 (351).

home
02-03-2013, 11:57 PM
can you please find out if 2011 ford ranger door panels can be interchanged with Mazda b4000 2008 doors.



I have built 2 gen 3's (93 & 94) and am workin on 2 more (94 & 95), so I will tell what I have found within these builds, but if you need to know other info, I have the ability to check via Ford catalogin at work:

93-97 fenders, hood, front bumper, grill, headlights, marker lights are a direct swap.
93-94 radiator supports are same and 95-97 are same (2 different PN's)
93-97 doors interchange
93 to 08 beds are direct bolt ons and taillights are interchangeable
92-02 Explorer rearends are direct bolt-in if you want 4" of drop in the rear, if don't want the drop, then you have to weld on new leaf spring perches
92-02 Explorer seats will bolt right in after you swap the Ranger tracks to them, the Explorer seats have the holes made into them for the tracks
93-97 cabs are interchangeable, as are 98 up
82-97 steerin boxes are interchangeable to include the MS boxes
82-94 heater boxes interchange, as does 95-97

I'm sure I'll think of more, but that's all I can think of for now!:icon_confused:

Colin
02-05-2013, 09:13 PM
ummm yeah, all interior pieces essentially interchange 96-current, styling might be a little different, but they'll all fit the same.

1986fordranger
02-06-2013, 12:20 AM
1991 to 1994 explorer headlights , turn signals , rad support , grill, and hood will interchange with 1989 to 1992 rangers and 1989 to 1990 bronco 2's


1986 to 1988 extra cab ranger rear corner windows interchange with 1989 to 1992 ranger's and vice versa , as does 1993 to 2011's

ThB14
02-06-2013, 07:23 PM
will 99 b4000 doors bolt on my 05 b4000

1986fordranger
02-06-2013, 09:50 PM
will 99 b4000 doors bolt on my 05 b4000yes

ThB14
02-11-2013, 09:29 PM
would 1999 ford ranger doors and box bolt on to my 05 mazda b4000

Colin
02-12-2013, 02:33 PM
yes, do you guys even read before posting?

green_duck42
09-22-2014, 09:53 AM
Bringing this thread back from the dead.
How about leaf springs. Found a set on Craigslist from an 88 ranger and wondering if they will fit my 98.

opcfan
09-28-2014, 02:56 PM
79-04 mustang seats are a direct swap with rbv tracks

What are rbv tracks and where do you get them?

dark_flame221
10-01-2014, 10:51 PM
ive seen a 91 body on a 99 frame with the 99s dash and engine and some other interior parts



holy sh*t !

green_duck42
10-01-2014, 10:54 PM
Rbv= Ranger Based Vehicle

alaskan155
10-02-2014, 11:42 AM
Rbv= Ranger Based Vehicle

ill bust it down in simple form

83-92 are the same(minus dash and front fenders/clip)
93-current are same(minus 3/4 door, dash in 95, and ifs in 98)

core supports/radiator changes break dowm
83-88
89-92(can be modded for 83 headlights/grill) if need be
93-94
95-97
98-current

firewall(only 2 designs)
83-94
95-current

doors(2 designs)(explorer doors and mirrors do not interchange with rangers)
83-92
93-current


the inner structure is the same from 83-last year, so the body mounts are the same minus the radiator support on the front for the 98+(frame horns are a little wider)

back window interchange
regular cabs are the odd ball, 83-97 reg cab back windows interchange

ext cab is 83-current, and 98+ reg cab(only cab that wont bolt to a 97 and older frame) share the same back window

2wd ranger frames are the odd ball, all other rbv are based off the 4wd chassis up to 97.

95-01 exploders have the same front suspension 2wd or 4wd as the 98+ torsion bar rangers

add more as i think of there are differences in wiring.
body lines are different on explorers but the floor pan for the front is the same as a ranger extended cab.