Constant Power

Brandon12 · Dec 2, 2009

Just changed decks and im getting constant power now. Everything else works. What wires did put it in wrong. I have the yellow and red wires together, is that bad? I think its power and accesorie?

4x4fun · Dec 2, 2009

yes thats wrong.

black ground
red constant
yellow(older stuff has been oraange) acc

the red stays on to keep your settings

the yellow really turns the radio "on" and 'off" when you turn the truck on
if its tied to the red (constant 12v) it will stay on and run the battery down

Brandon12 · Dec 2, 2009

ok, well when i got the stereo the red and yellow were tied into a fuse and on the other side of the fuse only the yellow came out so i just split the red and yellow together from the wiring harness and connected it the yellow from the fuse. So if i just remove the red from the fuse and hook it to the other red, and no red touching yellow, problem solved correct? And thanks. I just pulled the fuse out for now.

4x4fun · Dec 2, 2009

Yes, but you want the fuse on the red. They yellow allready has one from the factore wiring harness.

Loud Ranger · Dec 2, 2009

4x4fun said:
yes thats wrong.

black ground
red constant
yellow(older stuff has been oraange) acc

the red stays on to keep your settings

the yellow really turns the radio "on" and 'off" when you turn the truck on
if its tied to the red (constant 12v) it will stay on and run the battery down

other way around bud, red is switched power (ignition) and turns it on and off, yellow is where your radio pulls all its power from and is connected to a constant power (battery) and keeps your presets and settings when you shut it off.

4x4fun · Dec 2, 2009

But if it's all ready wired. Put the fuse in make sure it works. It will run just fine. But it's unsafe to not have a fuse. So why have two fuses on one and non on the other.

Brandon12 · Dec 2, 2009

Ok so maybe you can answer this, I put the fuse back in when i left and now it doesnt get constant power but it still has no memory. Havent touched any wires :icon_confused:

4x4fun · Dec 3, 2009

Loud Ranger said:
other way around bud, red is switched power (ignition) and turns it on and off, yellow is where your radio pulls all its power from and is connected to a constant power (battery) and keeps your presets and settings when you shut it off.

mheeee what ever lol been a long day. And there labled. On 12v ones acc. Don't hook them together lol

Original_Ranger84 · Dec 4, 2009

yeah... re wire it so that the yellow is fused and connected directly to the battery then the red will connect to the ignition source and your good to go.

Constant Power

Brandon12

15+ Year Member

4x4fun

15+ Year Member

Brandon12

15+ Year Member

4x4fun

15+ Year Member

Loud Ranger

15+ Year Member

4x4fun

15+ Year Member

Brandon12

15+ Year Member

4x4fun

15+ Year Member

Original_Ranger84

15+ Year Member

Sponsored Ad

TRS Events & Gatherings

Latest posts

Featured Rangers

TRS Latest Video

Official TRS Merchandise

Follow TRS On Instagram

Latest Album Photos

Product Suggestions