PDA

View Full Version : 2 1/2 ton truck troubles


4x4mike2004
10-26-2009, 09:09 AM
It developed a slight vibration not too long ago. we checked all the steering joints, bushings, driveshafts, ext for any damage or bad components an found nothing. a fwe of the tires were replaced recently and we thought that maybe the tires had started to flat spot. So we took it for a ride and vibration started to get worse so i backed off the gas a little, but it didnt help. Suddenly the truck began violently shaking and making a hellacious noise, followed by screaming metal and even mor shaking. I managed to get the truck to the side of the road and shut it down. A look under neath revealed the carnage, shattered bell housing, the trans was twisted and pushed back 6inches, front PTO shaft was pulled apart, trans to T-case shaft was ripped apart, the shifter pulled back and put a hole in the floor, bent crossmember, and a bunch more mangled parts. Needles to say the truck will be heading to the parts yard in the sky. Sorry no pics now but i will get some later.

orfordguy@yahoo.com
10-26-2009, 09:51 PM
your n ot really just gonna throw away such a good project/parts rig

zukirider21
10-27-2009, 04:46 PM
yeah seriously come on dude, DONT DO IT!!!!

D.J.
10-28-2009, 08:23 AM
Someone out there is probally looking for a lot of your parts!

D.J.
10-28-2009, 08:23 AM
what about the photos?

4x4mike2004
10-29-2009, 12:01 AM
i cant seem to get the pics to resize small enough to fit on here:annoyed: dont have a say in what happens to the truck, is goes back to DCNR, probably will get used for parts tho.

Southern_Trendkill
10-29-2009, 12:53 PM
Don't throw it away dude. If I was closer and had a place to put it, I'd take that for a project.

4x4mike2004
10-29-2009, 05:45 PM
believe me i would take it too if i could an fix it but it is up to the department of forestry.

orfordguy@yahoo.com
11-02-2009, 02:52 PM
thats a bummer man but some times they auction them off.

D.J.
11-10-2009, 11:16 PM
I would guess you are a member of the fire service, am I correct?