This is my first time doing any suspension upgrades on a vehicle, and I cant seem to figure out what to expect when adding a 2" leveling kit to my I-beam front end. I swapped out my 7.5 open 3.73 for an 8.8 4.10 L/S I also added 2 inch blocks and leafs out of an '02 4wd. All that being said I want to lift the front a bit so that it is slightly more level but as far as my camber goes is it a drastic change? Is there a direct bushing swap that will correct the difference or do I need to get the adjustable bushings(from NAPA I think)? I've used the search function but I can't seem to find exactly what I'm looking for, everyone seems to speak like I allready know what they are talking about. The front end work starts next weekend so I could really use a hand.
Thanks
Edit: Just found the camber bushing section in the tech library, was pretty helpful but if any of you have other thoughts/tips/tricks please share them.
Thanks
Edit: Just found the camber bushing section in the tech library, was pretty helpful but if any of you have other thoughts/tips/tricks please share them.
Last edited:
