oOMG!!!

Ranger4657 · Sep 18, 2009

god i hate brakes,

my fronts were dragging hardcore, replaced the calipers and pads and hoses.... , no more drag and wheels spin freely, but hubs and wheel still gets HOT!!!

i also checked the spindle nuts to retourqe them and they were right on.... -_-
IM AT MY whits end!!! );

any one have this problem and find a solution?

Sasquatch_Ryda · Sep 18, 2009

What are you torquing the lock nuts to?

Ranger4657 · Sep 18, 2009

inner lock nut 16inch punds outter tight enough so they dont come loose.

Ranger4657 · Sep 18, 2009

i also just dissasembled and repacked the bearings and turned the rotors after i posted this so far so good... lets hope it stays this way -_-

also as a side note. the guy who did my allignment really over tightened the spindle nuts.... i didnt know this until after i disasembled it and as a result there was no grease in the outter bearings and very little on the inner bearings..... (i figured the guy i usually pick for this stuff would know his stuff... apparetly not. -_-, i just assumed he knew what to do... )
so i guess no more taking it to that mechanic.

oOMG!!!

Ranger4657

15+ Year Member

Sasquatch_Ryda

TRS Staff - Retired

Ranger4657

15+ Year Member

Ranger4657

15+ Year Member

Sponsored Ad

TRS Events & Gatherings

Latest posts

Featured Rangers

TRS Latest Video

Official TRS Merchandise

Follow TRS On Instagram

Latest Album Photos

Product Suggestions