I have a 2000 4x4 but it is extremely hard to find lifts for that year. the majority if found is for up to year 97. i know up to 97 wasnt torsion bar front end so those are out. anyone know a good place to get a 3-4 inch lift for a reasonable price?
want to lift my 2000
- Thread starter coolman1987us
- Start date
- Joined
- Sep 26, 2008
- Messages
- 1,786
- Points
- 3,101
- City
- Boring, Oregon
- Vehicle Year
- 2001
- Transmission
- Manual
Your only options are the 4" Superlift($1500 new) and the 5" RCD coil-over conversion lift(currently non in production, $2500-3000 new), and a 3" Bodylift($200 new).
I've seen superlifts for around the $600-800 range selling used...gotmine for $450. RCD at about $800-1200 used. Bodylifts are so cheap you should just buy new and not deal with used.
I've seen superlifts for around the $600-800 range selling used...gotmine for $450. RCD at about $800-1200 used. Bodylifts are so cheap you should just buy new and not deal with used.
the 4" superlift comes with new upper and lower control arms right?
- Joined
- Sep 26, 2008
- Messages
- 1,786
- Points
- 3,101
- City
- Boring, Oregon
- Vehicle Year
- 2001
- Transmission
- Manual
no.
Both suspension systems I listed don't. They both come with new knuckles that bridge the larger gap between the upper and lower control arms after the LCA drops are installed.
Both suspension systems I listed don't. They both come with new knuckles that bridge the larger gap between the upper and lower control arms after the LCA drops are installed.
so it drops the whole front cross member then, and you use most of the same components?
- Joined
- Sep 26, 2008
- Messages
- 1,786
- Points
- 3,101
- City
- Boring, Oregon
- Vehicle Year
- 2001
- Transmission
- Manual
Both kits use diff drop brackets, lower control arm drops/crossmember drops, torsion bar drop on the superlift, new knuckles.
the stock x-member doesn't actually move, a new x-member is bolted to it.
Superlift:
the stock x-member doesn't actually move, a new x-member is bolted to it.
Superlift:
ok that makes sence... your missing a bumper though right?
- Joined
- Sep 26, 2008
- Messages
- 1,786
- Points
- 3,101
- City
- Boring, Oregon
- Vehicle Year
- 2001
- Transmission
- Manual
that pic is 2 years old right after the superlift install. lol. Not missing the valence anymore...
ya thats what i thought lol... nice setup btw
Sponsored Ad
TRS Events & Gatherings
Featured Rangers
TRS Latest Video
Official TRS Merchandise
Follow TRS On Instagram
