347 Stroker Trans


zukirider21

15+ Year Member

Joined
Jul 23, 2009
Messages
851
Points
3,101
City
NJ
Vehicle Year
89
Transmission
Manual
alright so im building a 347 stroker for my 89 ranger 2wd ext cab, and im shooting for 450hp. but i cant decide on the tranny.

tci built c4 or junkyard (ill rebuild it) c6?

it will be motatin a 31 spline 8.8 with a lock right locker and 4.56 or 4.88 gears spinning 32" swampers.

oh and the motors getting a disgusting cam (ford racing x303 or equiv) so im probably looking at a converter stall speed of around 2200rpm or higher...
 
your best bet is a c4 they are smaller then the c6. and can take the 450 hp that u want to run, plus there is less power loss through the drive train. and as for the x cam i ran the same one in a mustang that me and my dad had built and it woke the motor up. but if u are runnin a auto trans u are going to want at lease 2200 stall. good luck and look forward to pics :headbang:
 
Xcam = 3000-3500 stall...which is probably too much for the truck.

Ryan
 

Sponsored Ad

TRS Events & Gatherings

Featured Rangers

Want to see your truck here? Share your photos and details in the forum.

TRS Latest Video

Official TRS Merchandise

Follow TRS On Instagram


Product Suggestions

Back
Top