- Joined
- Aug 21, 2009
- Messages
- 2
- Points
- 3,001
- Vehicle Year
- 2000
- Transmission
- Automatic
Okay, so I'm not the best when it comes to wiring up cars. I have a 2000 ranger that had a busted driver window. Took it apart and found the switch/connector was bad. Got a new one from the dealer, but ran into a snag with the connector; the wires from the new connector are all black, whereas the wires coming out of the harness are color coded.. All I need is a pinout or similar of the connector, showing which wire should be which color. if anyone can help it would be greatly appreciated.
