- Joined
- Aug 13, 2009
- Messages
- 14
- Points
- 3,101
- Vehicle Year
- 1992
- Transmission
- Manual
I Need To Know The Easiest Way To Get A 3" Inch Drop In The Rear And 2 Up Front And Do I Need To Do 4" In The Rear To Make It Set Even
92 Ranger Drop ?
- Thread starter BLACKDECEPTION
- Start date
- Joined
- May 1, 2009
- Messages
- 488
- Points
- 3,101
- City
- Vermilion, OH
- Vehicle Year
- 91 and 00
- Transmission
- Automatic
Here is a link to my vendor thread which has all of the parts you would ever need to lower your truck. http://therangerstation.com/forums/showthread.php?t=56199
you could use the Belltech 2 inch front drop coils in the front but a 3" drop on that year ranger is the tricky part. You can do a 2 inch hanger and shackle flip or you could go with a 4 inch flip kit. Most people run the DJM 3/4 kit which has the flip kit and the 3" drop I-beams. The I beams are a better platform to start out your drop with because if you ever want to go lower then you can add the coils for a 5 inch front drop or if you may ever bag, or juice the truck you have the beams out of the way. But thats your call and all the resources are listed in the link above.
you could use the Belltech 2 inch front drop coils in the front but a 3" drop on that year ranger is the tricky part. You can do a 2 inch hanger and shackle flip or you could go with a 4 inch flip kit. Most people run the DJM 3/4 kit which has the flip kit and the 3" drop I-beams. The I beams are a better platform to start out your drop with because if you ever want to go lower then you can add the coils for a 5 inch front drop or if you may ever bag, or juice the truck you have the beams out of the way. But thats your call and all the resources are listed in the link above.
Sponsored Ad
TRS Events & Gatherings
Featured Rangers
TRS Latest Video
Official TRS Merchandise
Follow TRS On Instagram
