- Joined
- Nov 12, 2007
- Messages
- 1
- Points
- 3,001
- Age
- 45
- Vehicle Year
- 1993
- Transmission
- Manual
93 ranger V-8 311 stroker
richmond tranny
7/8" bore on master cylinder
i bought a quartermaster 721100 release bearing. measured by thier specs, installed shims and tested. fluid went everywhere. repaired and rechecked. worked for a while. Hammered the throttle and the o ring didn't hold. Any suggestions???
richmond tranny
7/8" bore on master cylinder
i bought a quartermaster 721100 release bearing. measured by thier specs, installed shims and tested. fluid went everywhere. repaired and rechecked. worked for a while. Hammered the throttle and the o ring didn't hold. Any suggestions???
