PDA

View Full Version : Help with cab bolts


RangerJ
06-28-2009, 05:37 PM
1989 4x4 xlt 2.9 auto.I have a loose cab bolt on the pass side What is the simplest way to locate the bolt head inside the cab? I have rear jump seats but I cannot find the bolt head. What do I need to do?Thanks.

Sasquatch_Ryda
06-28-2009, 07:15 PM
they are underneath the carpet.

metalmacguyver
06-28-2009, 07:58 PM
2 screws hold in the back edge of carpet down, phillips head screws. Then the bolts are under the rubber plugs that you will see.

AllanD
06-28-2009, 10:34 PM
under the carpet against the back of the cab there is a box member that crosses the back of the cab. on either side there is a rubber grommer cover and under that against the bottom of that box member are the blt heads.

the other bolts are under a screwed down sheetmetal cover (oval shaped)
under the carpet on the front foot wells.

If you bolts are loose you have a collapased mount.

The mounts are not "rubber" but rubber over an internal steel structure
the steel inside them rusts and the rubber can't support the weight.


AD

RangerJ
07-08-2009, 01:50 PM
Thanks for the replies. I will give it a try.