prekey mod height


i_gots_to_4x4

15+ Year Member

Joined
May 31, 2009
Messages
57
Points
3,101
Vehicle Year
08
Transmission
Automatic
can anyone who has done the prekey mod get some measurements for me? my question is the height measured from the ground to the top of the wheel well after the swap and with the bolts at stock crank. thanks!
 
Why would you not try turning your stock keys up before going to the hassle of disassembling and installing new (used) keys?

You might be able to get the height you are after by simply turning up the keys you have.

Keep in mind, Ford quite commonly sizes their shocks to the stock ride height... So you will likely need shocks too.
 
Why would you not try turning your stock keys up before going to the hassle of disassembling and installing new (used) keys?

You might be able to get the height you are after by simply turning up the keys you have.

Keep in mind, Ford quite commonly sizes their shocks to the stock ride height... So you will likely need shocks too.

Probably because 2008's sit a lot lower than the 98-07 trucks do.

I did a crank on an 08 and it could just barely clear 265/75r16's.
 
He did ask about pre keys at stock height... that would likely equal 08+ keys maxed out.

id try maxing out the keys and then determine whether you need new keys after that
 
prekey mod height

prekey mod height

I'm 37 inches from ground to fender flare in the front. I'm sitting on 33x12.5R15's and maxed prekey's. Hope that helps!
 
wow that is beautiful man , thats exactly what i was looking for,
i'm assuming you have belltech shackles in the rear ? how much 1 or 2"?
 

Sponsored Ad

TRS Events & Gatherings

Latest posts

Featured Rangers

Want to see your truck here? Share your photos and details in the forum.

TRS Latest Video

Official TRS Merchandise

Follow TRS On Instagram


Product Suggestions

Back
Top