- Joined
- Aug 30, 2007
- Messages
- 2,439
- Points
- 3,101
- Age
- 38
- City
- Cass Co, Missouri
- Vehicle Year
- 1994
- Transmission
- Manual
These are my 64"ers. I managed to pick up a set of 4" lift 3/4 ton 88+ GM springs on Ebay for $200 shipped. I removed a couple of springs, and settled on the way they are. But that was only going by what looks good, no spring rates were measured. Does anyone have an opinion on how they will perform? All said and done, the only weight that will really be in my bed will be a spare 37x12.5-15 on a 15x10 steel wheel, the mount for it, and some tools.
As is now, from eye-eye to the bottom of the pack they measure 10", when I put my 145lbs on them, they compress 1" to 9". These packs compared to my OEM packs are thicker, these measure 1/4" thicker at the center bolts.
Should I take anymore out, or possibly put some back in? Maybe, swap back in other length ones?
As is now, from eye-eye to the bottom of the pack they measure 10", when I put my 145lbs on them, they compress 1" to 9". These packs compared to my OEM packs are thicker, these measure 1/4" thicker at the center bolts.
Should I take anymore out, or possibly put some back in? Maybe, swap back in other length ones?
