92 Ranger 60/40 Seats to Buckets
- Thread starter Aaron
- Start date
- Joined
- Jun 1, 2001
- Messages
- 7,897
- Points
- 5,101
- Age
- 64
- Vehicle Year
- 1987... sorta
- Transmission
- Manual
http://www.therangerstation.com/tech_library/Seats.html
This questions has been asked atleast twice right here on the front page of "interior"
AD
- Joined
- Apr 6, 2009
- Messages
- 114
- Points
- 3,101
- City
- Camdenton, MO
- Vehicle Year
- 1994
- Transmission
- Automatic
Well to be honest the Tech Library section for seats is very....lacking so I believe its a fair question.
- Joined
- Aug 10, 2007
- Messages
- 2,715
- Points
- 3,101
- City
- HIGHLAND, MICHIGAN
- Vehicle Year
- 1994
- Transmission
- Manual
just about any seat with a 14"x 14" (or is it 16"x16", i cant really remember) will bolt right in. i used some seats from a 98 mustang in my 1990 ranger. i think i payed $75 for the pair, but they were electric and the car was in the junkyard so it was a pain in the ass to get them out without a battery in the car. i have also done the 60/40 to bucket conversion, where you cut the middle of the 60 side off and then sew it back up and now you have 2 buckets instead of a split bench.
http://www.therangerstation.com/tech_library/6040tobuckets.htm
http://www.therangerstation.com/tech_library/6040tobuckets.htm
Last edited:
Yea, I wanted buckets too but all the junk yards were too expensive. I used the Tech article very successfully to convert my 60/40 to a bucket-type. Did have new cover fitted for the lower seat at upholstery shop but it looks like factory job.
- Joined
- Aug 16, 2007
- Messages
- 974
- Points
- 3,101
- Age
- 40
- City
- Manahawkin, NJ
- Vehicle Year
- 1998
- Transmission
- Manual
In my 98 I cut off the center section of the 60 piece, cut the excess cloth and tied it all back and threw in a center console like many others have done. You can't tell the difference.
- Joined
- Aug 7, 2007
- Messages
- 3,490
- Points
- 3,101
- Age
- 61
- City
- west tennessee
- Vehicle Year
- 85
- Transmission
- Automatic
The 60/40 tracks fit a ton of seats.I used some buckets from a nissan pulsar........bolted right up.
i just put in 92 exploder seats into my ranger using my 60/40 tracks
Sponsored Ad
TRS Events & Gatherings
Featured Rangers
TRS Latest Video
Official TRS Merchandise
Follow TRS On Instagram
