Advice on removing old shackles


GBranger04

GBranger04

15+ Year Member

Joined
Feb 25, 2008
Messages
138
Points
3,101
Age
39
City
Vancouver BC, Canada
Vehicle Year
2004
Transmission
Automatic
so i'm part way through removing the old shackles so i can install the belltech's (got the top bolts out) but can't seem to get the bolt of the leafspring/shackle hole. i have the nuts off but can't get the bolts out. i have tried beating, prying, WD40.. but it doesn't seem to be working. anybody have similar problems? solutions and advice would be appreciated.

GB
 
try taking a cut off wheel.. cut the front/back of the bolt on the leaf an then use an air hammer and see if it will come out.. if that doesnt work then try heating it up basically melting the bushing an your going to have to replace the bushings. i picked up some bushings at the local spring shop for 11 bucks a piece. so if you have to go that route its not horrible.
 
well i don't have an air hammer but i could probably get a hold of a torch and try heating it up, thanks for the idea and if bushings are that cheap then i may as well replace them anyway.

anyone else have other ideas?
 
You must log in or register to reply here.

Sponsored Ad

TRS Events & Gatherings

Where We Were in 2025 – The Ranger Station

Latest posts

Featured Rangers

Want to see your truck here? Share your photos and details in the forum.

TRS Latest Video

Official TRS Merchandise

Follow TRS On Instagram

Latest Album Photos

IMG_4690.JPEG
IMG_4689.JPEG
IMG_4688.JPEG
IMG_4679.JPEG
IMG_4656.JPEG
IMG_4625.JPEG
IMG_4562.JPEG
IMG_4561.JPEG
IMG_4560.JPEG
IMG_4559.JPEG
IMG_4558.JPEG
IMG_4445.JPEG

Product Suggestions

Back
Top