How To Adjust Camber After 2 Inch Drop???

SykoRanger88 · May 19, 2009

my truck is 2 inches lower in the front now from cutting the coils and the camber is way negative, how do i adjust them back into spec? can i just make an adjustment or do i gotta buy a bushing kit or something? thanks.

Yvan · May 19, 2009

With a 2 inches drop i'm not that you can fix your camber with the factory bushings, but the best way to now it, its to send it to the alignement ans they will tell you.

sean9721 · May 19, 2009

Buy some adjustable camber bushings. I have some +/- 3.5 degree bushings that I bought from Advance for $19.46 a piece. They also sell +/-4 degree bushings but they are $35 a piece. Napa also sells the bushings but I dont know the price. And Advance will have to order the bushings. Mine came in the same day though.

doorgunner · May 19, 2009

check out the "camber eccentrics" thread in the 2WD Suspensions sub forum.......it's got lots of info!!!!

5.0 · May 19, 2009

.

A friend used these when he lifted his truck, I think will work for us too... the Napa part number is NCP 2643950 and they are $31.99 each.

How To Adjust Camber After 2 Inch Drop???

SykoRanger88 · May 19, 2009

so then i just need to go to Napa, Autozone, or Advanced or something and ask for +/- 3.5 bushings and i should be fine?

sean9721 · May 19, 2009

SykoRanger88 said:
so then i just need to go to Napa, Autozone, or Advanced or something and ask for +/- 3.5 bushings and i should be fine?

Yes, or may ask for the +/- 4 degree ones.

doorgunner · May 19, 2009

yep, and if you do any more suspension work to the front end.....all you gotta do is re-adjust the E. bushings!

:yahoo:

Z3CHYD · May 21, 2009

I did the same to my ranger, i bought the 3.5 degree bushings, took it to an alignment shop and had it aligned, now it steers fine and doesn't wear the tires out, but the ride does get a tad rougher

Z3CHYD · May 21, 2009

here's mine installed

just loosen the side bolt holding the eccentric tight, wiggle the old one out, and put the new one in, and of course align it

doorgunner · May 21, 2009

wish I'da invented that thang.....

SykoRanger88 · May 24, 2009

alright cool ill ask for the 3.5 ones, thanks for the picture also.

SykoRanger88 · May 30, 2009

Z3CHYD said:
here's mine installed

just loosen the side bolt holding the eccentric tight, wiggle the old one out, and put the new one in, and of course align it

im kinda confused, are you sure your suspension setup is same as mine? i looked all over my trucks spindle area and stuff and i couldnt find anything that looked like what you took a picture of.

ILLEGALCONCEPTS · May 30, 2009

SykoRanger88, your will be different. It still should be right at the top of your spindle on the I-beam. I did a quick search at summitracing and found these:

http://store.summitracing.com/egnse...94908331+4294907827+4294925130+115+4294846096

See if that helps.

James

SykoRanger88 · May 30, 2009

wow like 40 bucks a piece wtf...i hope autozone,advanced or napa has what i need hopefully for less.

How To Adjust Camber After 2 Inch Drop???

SykoRanger88

15+ Year Member

Yvan

15+ Year Member

sean9721

15+ Year Member

doorgunner

Lab Rat for V.A. hospital

5.0

15+ Year Member

SykoRanger88

15+ Year Member

sean9721

15+ Year Member

doorgunner

Lab Rat for V.A. hospital

Z3CHYD

15+ Year Member

Z3CHYD

15+ Year Member

doorgunner

Lab Rat for V.A. hospital

SykoRanger88

15+ Year Member

SykoRanger88

15+ Year Member

ILLEGALCONCEPTS

15+ Year Member

SykoRanger88

15+ Year Member

Sponsored Ad

TRS Events & Gatherings

Latest posts

Featured Rangers

TRS Latest Video

Official TRS Merchandise

Follow TRS On Instagram

Latest Album Photos

Product Suggestions