- Joined
- May 14, 2009
- Messages
- 1
- Points
- 3,001
- Transmission
- Automatic
I bought my truck used and it ran fine for a good while but i then started having misfire on one of the cylinders. I took the spark plug out and it felt as though the spark plug was fused but i took it out and it looked like this.
Here is a link to a picture of the spark plug.
http://members.cox.net/dman1843/P5140090.JPG
The rest of the plug that have been in look normal compared to that monstrosity.
Its a 2000 Ranger V6 4.0 OHV
Could it be that there is leakage somewhere in the block that's leaking oil or some fluid? Is it injecting too much gas? What could cause the spark plug to look like that.
Any feedback is helpful. Thank you.
Here is a link to a picture of the spark plug.
http://members.cox.net/dman1843/P5140090.JPG
The rest of the plug that have been in look normal compared to that monstrosity.
Its a 2000 Ranger V6 4.0 OHV
Could it be that there is leakage somewhere in the block that's leaking oil or some fluid? Is it injecting too much gas? What could cause the spark plug to look like that.
Any feedback is helpful. Thank you.
