2" lift coils same height as stock coils?


nismotunedgtr

15+ Year Member

Joined
Jan 14, 2008
Messages
216
Points
3,101
Age
36
City
USA
Vehicle Year
1998
Transmission
Automatic
Hey I got a set of 2" lift coils for my Ranger off a friend. He bought them for his B2....

I have a 1992 STX with the 2.9L (FOR NOW)...

Got one of my coils out tonight and it's the same exact height as the lift coils. I can't compress the lift coils by hand but I can compress the stock ones a little. Is this how I'm going to get lift?

I got the Moog fully adjustable -4* to 4* alignment bushings and I plan on maxing them out with washers under the springs if need be.

So am I going to get any lift with these?

Thanks!

2" lift coils same height as stock coils?

2" lift coils same height as stock coils?

2" lift coils same height as stock coils?
 
the stx's sit 2" higher from the factory than the reg. rangers i believe.
 
venom97 said:
the stx's sit 2" higher from the factory than the reg. rangers i believe.
Click to expand...
Not all STX's have the High Rider package. I don't think it was an option in '90.

You have to take into consideration that the spring rate might be more on the 2" lift coils than your stock coils. If it is, then they can be the same height because they will not sag.
 
mjonesjr said:
Not all STX's have the High Rider package. I don't think it was an option in '90.

You have to take into consideration that the spring rate might be more on the 2" lift coils than your stock coils. If it is, then they can be the same height because they will not sag.
Click to expand...

thanks for the correction,i wasnt 100% sure on that.
 
Damnit I'm going to be very pissed if I don't get any lift out of these things.

Just woke up :D going out right now and beting this thing down if they don't give me lift.

Trucks a 1992....
 
mjonesjr said:
Then you definitely do not have the High Rider Package.
Click to expand...

Yeah I figured I didn't. I was under the impression that gen 1's were the only ones to have the high rider option.

Going out to the garage this time for real :D
 
I had a pic of my leveling coil next to a stock one and it WAS taller then stock and heavier. have to dig it up. FWIW, mine are Rough Country.
 
Last edited:
My lowering coils were taller than my stockers for my 2002.. crazy eh?

need install pics now!
 
It looks like u have the snow plow springs from jc whitney. They gave me about 1 3/4 inchs of lift but it rode like a f 250! I ended up goin back to stock springs with a bunch of washers under them to get a half decent ride back.
 
Well I put one in and it didn't lift the ****ing truck any.
 
dude that sucks.....


if u need help anytime just give me a text...


hope u can get atleast some lift out of ur truck,

pce man

93splash
 
Well. I put them in along with a 3/8" space under the spring seats.

Trucks just about level now.

2" lift coils same height as stock coils?


Rides a hell of alot better too!
 
You must log in or register to reply here.

Sponsored Ad

TRS Events & Gatherings

Where We Were in 2025 – The Ranger Station

Latest posts

Featured Rangers

Want to see your truck here? Share your photos and details in the forum.

TRS Latest Video

Official TRS Merchandise

Follow TRS On Instagram

Latest Album Photos

IMG_4690.JPEG
IMG_4689.JPEG
IMG_4688.JPEG
IMG_4679.JPEG
IMG_4656.JPEG
IMG_4625.JPEG
IMG_4562.JPEG
IMG_4561.JPEG
IMG_4560.JPEG
IMG_4559.JPEG
IMG_4558.JPEG
IMG_4445.JPEG

Product Suggestions

Back
Top