3rd brakelight wiring help


dhdaniel

15+ Year Member

Joined
Apr 26, 2009
Messages
78
Points
3,101
Age
63
City
Baytown Texas- Gulf Coast
Vehicle Year
2019
Engine
2.3 EcoBoost
Transmission
Automatic
Hello group, I installed a Camper shell on my new truck, and am wondering where to tie in the LED 3rd brake light? I have found some info that says I may need a logic kit, to tie into the left & right side
brake wires. ANy help would be great

thanks

Dave
 
Third brake lamp is a circuit of its own. It is a light green wire coming out of the stop light switch. There is also a light green/red wire coming off. Don't get them confused. You can locate this wire by following the existing wire inside the cab and find a place to tap off.:)shady
 
Remove the fuse box under the hood, underneath it there will be a harness with wires comming out of the fire wall (beside the brake booster). There will be one wire that is deadended and has shrink tube on the end of it. That is drectly from the brake switch and is there for just this purpose. Run a wire along the frame and up into the tail lamp housing. If you wire it just into the tail light the 3rd brake light will blink with the signal on.
 
Remove the fuse box under the hood, underneath it there will be a harness with wires comming out of the fire wall (beside the brake booster). There will be one wire that is deadended and has shrink tube on the end of it. That is drectly from the brake switch and is there for just this purpose. Run a wire along the frame and up into the tail lamp housing. If you wire it just into the tail light the 3rd brake light will blink with the signal on.
Good info, dat. Do you know what year this started???:)shady
 
Can't say for sure but my guess would be in 98 when the body styles changed.
 

Sponsored Ad

TRS Events & Gatherings

Latest posts

Featured Rangers

Want to see your truck here? Share your photos and details in the forum.

TRS Latest Video

Official TRS Merchandise

Follow TRS On Instagram


Product Suggestions

Back
Top