yep, you need an ignition lock cylinder. its an easy job, if you dont have the tilt wheel its even easier. youll need to remove the two screws that hold the column cover on and then using a piece of coat hanger wire, locate the 1/4" hole on the underside of the lock cylinder and turn your key two clicks forward. insert the wire and push on it with some force as you pull the keys outward. the lock cylinder should come out easily but a little wiggling may be required. if you have the tilt wheel you just need to do more work to remove the column cover and you need to put a sharp bend in the coat hanger to clear the cover that stays on the column.
