Stupid Blinker Question

[Seabiscuit]

Why is the blink speed on the instrument panel so different between the left and right arrows?

[MAKG]

Bad connection somewhere.

If it were open, one side would stay on forever.

You can try to isolate it with a voltage drop test.

[srteach]

The turn signal uses the same blinker for both sides. If one circuit has less power use on it, it will blink faster. A burned out bulb will cause a turn signal circuit to use less power, and blink faster. Check all your bulbs.

[martin]

just turn on your hazard flashers and see which bulb is not working.

[Seabiscuit]

just turn on your hazard flashers and see which bulb is not working.

That did not work

[Seabiscuit]

The turn signal uses the same blinker for both sides. If one circuit has less power use on it, it will blink faster. A burned out bulb will cause a turn signal circuit to use less power, and blink faster. Check all your bulbs.

Is it a difficult task to change both bulbs?

:bling:

[Seabiscuit]

Found out rear left brake light and upper brake light needed replacement.