Axle truss for a Dana 28 & Dana 35

Lets Play · Feb 21, 2009

I was looking for an axle truss for one or the other Dana 28/35. I am planning on jumping a 1988 Bronco 2 as a tuff truck. I have the stock axles and also a 92 Explorer donor for the axles. I have a spare Dana 28 from another Bronco. Trying to keep the costs down and do have access to a sheet metal shop and welder.
Looking for any suggestions you have tried and if they worked or not.
Thanks!

brendank · Feb 21, 2009

It can definitely be done. CopyKat here on the forum did a set and they turned out nicely:

Lets Play · Feb 22, 2009

Thanks.
I'll check into them

Evan · Feb 22, 2009

Is that a common point of failure on our beams?

Ranger44 · Feb 22, 2009

I've seen both crbunit and compleckz crack their beams from just off-road abuse.

I'm sure if this thing was going to be jumped and ran hard, he'd want to reinforce it somehow.

canyoncritter · Feb 22, 2009

both beams are prone to cracking and bending.

the passenger side, short beam will crack/tear where the beam is no longer "boxed" in. boxing it in helps prevent this.

and the driver side is known to bend from the diff in towards the piviot.so ethier a truss on the front side or plating in the back side helps again.

the outter ends, out past th radius arms can bend also with really hard use as well.

Also welding up all the seams is not a bad ideal ethier for hard use...air borne tactics and such.

Lets Play · Feb 22, 2009

Thanks for the help. I'll certainly do something to reinforce the beams. Once I get them done this summer I'll post some pics and how it worked.
Thanks again

Axle truss for a Dana 28 & Dana 35

Lets Play

15+ Year Member

brendank

It's only money...

Lets Play

15+ Year Member

Evan

15+ Year Member

Ranger44

15+ Year Member

canyoncritter

15+ Year Member

Lets Play

15+ Year Member

Sponsored Ad

TRS Events & Gatherings

Latest posts

Featured Rangers

TRS Latest Video

Official TRS Merchandise

Follow TRS On Instagram

Latest Album Photos

Product Suggestions