Camburg brake setup


cargs

15+ Year Member

Joined
Aug 10, 2007
Messages
189
Points
3,101
Vehicle Year
1993
Transmission
Manual
To start that's a D44 hub and most likely a 5x5.5 bolt pattern. They are using some sort of aftermarket hub and possibly spindle. I can assume that is being use to prevent a rotor failure from taking out the bearings to they can limp back or more likely to use bigger bearings. The rotor is most likely a stock type rotor with the hat part of the rotor turned off and holes drilled and tapped for the hub. A lot of high buck aftermarket brakes are like this. I don't believe there are many 4x4 applications so they made their own.

Matt
 
Looks like 3/4 ton brake calipers
 
willwod calipers. and 12 inch rotors.The hub is a custom camburg piece,looks alot like a pro am hub.could be even....that has been macined out for the locking hub.

the locking hubs,I would say come from a 3/4ton d 44. with the external hubs.

still uses the dana35 spindle snouts.so they will still have the same problem of wheel bearing's backing off.

IMHO its a polished turd set up for using the dana 35 snouts.IMO they should have used the dana 44 snouts to spread the bearing's out.

great stoping power is nice, but its even nicer when your wheels stay on.

if you go on to race-dezert.com and search out camburg explorer you can find alittle info there.
 
You must log in or register to reply here.

Sponsored Ad

TRS Events & Gatherings

Where We Were in 2025 – The Ranger Station

Latest posts

Featured Rangers

Want to see your truck here? Share your photos and details in the forum.

TRS Latest Video

Official TRS Merchandise

Follow TRS On Instagram

Latest Album Photos

IMG_4690.JPEG
IMG_4689.JPEG
IMG_4688.JPEG
IMG_4679.JPEG
IMG_4656.JPEG
IMG_4625.JPEG
IMG_4562.JPEG
IMG_4561.JPEG
IMG_4560.JPEG
IMG_4559.JPEG
IMG_4558.JPEG
IMG_4445.JPEG

Product Suggestions

Back
Top