Lean on bank 1 when I fast rev it sounds like I'ts choking


Hitek

10+ Year Member

Joined
Jan 27, 2009
Messages
2
Points
3,001
Vehicle Year
97
Transmission
Manual
Ok i first had a code for a vacuum leak now fixed. My main problem now is after i fixed the vacuum leak it runs ruff if I lay on the gas quick or rev up fast and let off quick. I put some transmission fluid in the gas tank and it cleaned my fuel system. but i had a problem before and after i did that trick all four of my plugs on the exhaust side are wet when i pulled them out. the right are just fine, they look like there getting a good burn, is it my c02 sensor or my cat?

I had a code of p0171 and p0301 and p1443 , after i cleaned my MAF and and replaced some hoses i now only get p0171 code and of course all my left side plugs are wet. I took the intake connected to the manifold, that was a pain to get the bottom two bolts back on, never thought they have to be perfectly strait in order to screw em back in, took me a bit to figure that one out deep socket don't work, hits the valve cover

Ok it was my coil, some how i must have broke the connection when i pulled the valve cover off, Which was a pain in a halve. I still have a lean code in my fst bank and now when i rev it up it stutters when it cycles down, and when its at hi rev, I can hear the missing in one of the pistons.

If i give it a fast rev it like I'm choking it too much
 

Sponsored Ad

TRS Events & Gatherings

Featured Rangers

Want to see your truck here? Share your photos and details in the forum.

TRS Latest Video

Official TRS Merchandise

Follow TRS On Instagram


Product Suggestions

Back
Top